Brand: Bently Nevada Description: 106M1081-01 Condition: Brand New Certificate: COO TEST REPORT WARRANTY LETTER Warranty: 1 year Inventory Qty: 7 Payment Term: T/T Shipping Port: Shenzhen Bently Nevada 106M1081-01 Provides all-in-one AC-to-low-voltage DC conversion for 3500/3700 rack systems in control and hazardous-area environments.
|
Manufacture |
Bently Nevada |
|
Model Number |
3500/15-05-05-01 |
|
Ordering Number |
106M1081-01 |
|
Catalog |
3500/15 |
|
Description |
Universal AC Power Input Module |
|
Country Of Origin |
USA |
|
HS CODE |
8473309000 |
|
Dimension |
12.07*2.54*11.43 (CM) |
|
Weight |
0.7 kg |
Ordering Information
3500/15 Power Supply Module
3500/15 -AA-BB-CC
A: Power Supply Type (Top Slot)
03 Legacy High Voltage DC (88 to 140 Vdc)
04 Legacy Low Voltage DC (20 to 30 Vdc)
05 Universal AC Voltage (85 to 264 Vac rms)
06 High Voltage DC Supply 07 Low Voltage DC Supply
07 Low Voltage DC Supply
B: Power Supply Type (Bottom Slot)
00 No Supply (Used when no supply is required)
03 Legacy High Voltage DC (88 to 140 Vdc)
04 Legacy Low Voltage DC (20 to 30 Vdc)
05 Universal AC Voltage (85 to 264 Vac rms)
06 High Voltage DC Supply 07 Low Voltage DC Supply
07 Low Voltage DC Supply
C: Agency Approval
00 None
01 CSA / NRTL / C (Class 1, Division 2)
Technical Parameters
Input Voltage: 90–264 VAC, 47–63 Hz (auto-sensing) for Bently Nevada 106M1081-01
Output Rails & Ratings:
28 V DC @ up to 5 A (barrier and monitor bus)
12 V AC @ up to 1 A (auxiliary loads)
Regulation: ± 5 % under full load
Isolation:
Primary-to-secondary: 2 kV AC in Bently Nevada 106M1081-01
Secondary-to-chassis: 1 kV AC
Protections:
Inrush-current limiting (soft-start)
Overload/shutdown with auto-reset
Short-circuit protection
Over-temperature thermal cutoff
Efficiency: ≥ 80 % at 50 % load
Indicators: Front-panel LEDs for “AC OK,” “28 V OK,” “12 V OK,” and “Fault”
Environmental:
Operating Temp: –20 °C to +65 °C
Storage Temp: –40 °C to +85 °C
Humidity: up to 95 % RH, non-condensing
Product function
AC Conversion: Transforms facility AC mains into regulated DC/AC rails using Bently Nevada 106M1081-01.
Power Distribution: Delivers low-voltage power to barrier and I/O modules via backplane.
Health Monitoring: Supervises input/output rails and reports faults to system interface.
Application Areas
Turbine Control Panels: Centralized rack power with Bently Nevada 106M1081-01 for protection modules.
Compressor & Pump Skids: Skid-mounted monitoring in packaged machinery.
Petrochemical & Offshore: Hazardous-area panels requiring barrier power.
Retrofit Projects: Replacing external transformers via Bently Nevada 106M1081-01.
Test & Calibration: Bench-powering rack modules for maintenance using Bently Nevada 106M1081-01.
