Brand: Bently Nevada Description: 4 Channel Monitor Solar Turbine Condition: Brand New Certificate: COO TEST REPORT WARRANTY LETTER Warranty: 1 year Inventory Qty: 4 Payment Term: T/T Shipping Port: Shenzhen Bently Nevada 132417-01 is a real-time monitoring gauge for turbine, flapper, fine-tuning handler switch test device. It can dispose data support for fault diagnosis and predictive maintenance of equipments via vibration spectral analysis, time-domain waveform display, bearing condition parameters calculation and other functions.
|
Manufacture |
Bently Nevada |
|
Model Number |
132417-01 |
|
Ordering Number |
132417-01 |
|
Catalog |
- |
|
Country Of Origin |
United States (US) |
|
HS CODE |
8538900000 |
|
Dimension |
24*16*8cm |
|
Weight |
0.4kg |
Product Features
Bently Nevada 132417-01 supports 4-channel simultaneous acquisition of vibration signals, fully covering the key measurement points of the equipment.
Bently Nevada 132417-01 uses industrial-grade sensors and signal conditioning technology, with a measurement accuracy of ±2% and a sampling rate of up to 25 kHz to capture small vibration changes.
Bently Nevada 132417-01 is compatible with a wide range of sensor types, allowing users to select acceleration, velocity or displacement signal inputs according to their measurement needs.
Bently Nevada 132417-01 has built-in algorithms such as spectrum analysis and envelope demodulation to identify typical mechanical faults such as unbalance, misalignment and bearing wear.
Product Using Principle
Bently Nevada 132417-01 acquires equipment vibration signals through eddy current sensors, accelerometers, etc. and converts them into electrical signals for transmission to the monitor.
Bently Nevada 132417-01 amplifies and filters the original signal to remove noise interference and ensure signal quality.
After conversion, Bently Nevada 132417-01 utilizes FFT algorithm for spectrum analysis to extract characteristic parameters such as amplitude, frequency and phase.
Bently Nevada 132417-01 transmits to the upper computer through analog or digital interface to realize real-time monitoring and historical data storage.
Product Parameter
The following detail is for Bently Nevada 132417-01.
Number of channels: 4 channels.
Input types: Accelerometer (IEPE), velocity sensor (passive), displacement sensor (eddy current type).
Measurement range: 0.001 g/Hz to 10 g/Hz (acceleration), covering low-speed to high-speed rotating equipment.
Output signals: Analog (4-20 mA), digital (RS485/Modbus), supporting integration with DCS or PLC systems.
Power supply requirement: 24V DC (typical value, refer to specific models for details).
