Bently Nevada 21504-000-040-05-02

1. Technical Parameters

Sampling frequency:  Hz sampling frequency can effectively capture the rapid instantaneous changes of abnormal signals, from high-frequency pulsating vibration to slowly changing low-frequency signals, all can be completely collected and recorded without missing any key information.

Channel characteristics: Bently Nevada 21504-000-040-05-02 can set multiple independent channels, such as 40 channels, and can collect data from multiple parts of the equipment at the same time, such as shaft vibration and bearing temperature at different locations, so that the equipment status can be seen at a glance.

2. Functional characteristics 

Real-time monitoring and early warning: Bently Nevada 21504-000-040-05-02 can monitor equipment vibration, temperature and other parameters in real time and continuously. Once the parameters exceed the standard, the precise early warning mechanism will be activated, and the control center will be alerted immediately with audio-visual alarms and multiple communication interfaces to quickly respond and take action to avoid the expansion of faults.

Data analysis capability: Bently Nevada 21504-000-040-05-02 has a built-in advanced analysis engine that can perform time domain, frequency domain, and multi-parameter correlation analysis on the collected data, converting complex raw data into easy-to-understand equipment operation status assessment reports, and accurately locating common failure modes such as imbalance, misalignment, and wear, laying a solid foundation for equipment maintenance and repair.

Data storage and transmission: Bently Nevada 21504-000-040-05-02 has a large storage capacity and can store monitoring data for a long time, which is convenient for traceability and in-depth analysis. With multiple transmission methods such as Ethernet and RS485, the collected monitoring data can be integrated into the factory control system to achieve remote monitoring and central management.

3. Installation and use 

Installation points: During the installation of Bently Nevada 21504-000-040-05-02 , care should be taken to ensure that the equipment is placed in a stable environment that is not subject to strong electromagnetic interference. The installation of the monitoring section sensor should strictly follow the prescribed method and position to achieve the best coupling with the equipment, so as to obtain true and reliable measurement data.

Easy operation: The simple and user-friendly operation interface allows users to smoothly complete parameter setting, data viewing, alarm threshold setting and other operations, lowering the threshold for use and improving work efficiency.

4. Maintenance and care 

The equipment should be cleaned and inspected regularly, focusing on whether the sensor connection is firm and whether the cable is damaged, etc., to prevent hardware failures from causing abnormal monitoring data. The instrument should be calibrated regularly at the prescribed time interval to ensure that the measurement accuracy is always in the best state, thereby ensuring the long-term stable and reliable operation of the equipment and providing continuous and strong support for industrial production.