Bently Nevada 24701-16-10-15-114-00-02

1.Technical Parameters

Measurement Channels: Bently Nevada 24701-16-10-15-114-00-02 system has 16 independent measurement channels that can simultaneously monitor all important parts of the equipment: vibration, displacement, and related temperature parameters of different shaft sections. This allows you to quickly and clearly grasp the operating status of the equipment.

Sampling frequency：Bently Nevada 24701-16-10-15-114-00-02 has a sampling frequency of up to 10,000 Hz. The high sampling frequency can accurately capture the details of fast-moving signals. Whether it is sudden impact vibration or slow movement trends, they can be analyzed without losing or misinterpreting the signal.

Measurement accuracy：Bently 24701-16-10-15-114-00-02 has a vibration displacement measurement accuracy of ±0.025 mm, a velocity measurement accuracy of ±0.025 mm/s, an acceleration measurement accuracy of up to ±0.25 m/s, and a temperature measurement accuracy of approximately ±1 °C. Therefore, high-precision measurements can serve as the basis for reliable assessment of the health status of the equipment.

2.Functional Features 

Real-time monitoring alarm：Bently Nevada 24701-16-10-15-114-00-02 can monitor the operating parameters of the equipment around the clock. If the monitoring data exceeds the pre-set safety threshold, an audible and visual alarm is generated, and the alarm information is transmitted to the control center or relevant maintenance personnel through a variety of communication interfaces (most notably Ethernet, RS485, etc.), so that the fault can be quickly eliminated before the equipment fails. Analyze data and make a diagnosis. The built-in powerful data analysis software can conduct in-depth time domain, frequency domain and trajectory axis analysis of the collected data, so as to accurately identify the possible fault status of the equipment imbalance, misalignment, bearing failure, etc. Finally, a very detailed diagnostic report is generated to provide accurate prompts for equipment repair and maintenance.

Data storage and management：Bently Nevada 24701-16-10-15-114-00-02 can store a large amount of historical operation analysis data over a period of time, which is convenient for users to search, compare and analyze data at any time. A complete operation history trajectory can be expanded to reveal operations and/or problems that need to be repaired. The results can guide the formulation of optimization strategies for equipment maintenance.

3.Installation and Use 

Installation environment requirements：To ensure stable operation of the system, it should be installed in a dry and ventilated environment and away from strong electromagnetic interference sources. The installation of the sensor must be carried out strictly in accordance with the operating procedures to ensure that it is tightly connected to the monitoring part and correctly positioned to obtain accurate and effective measurement data. 

Operation interface: It has a user-friendly basic intuitive operation interface. Users can easily set parameters, read data, adjust alarm thresholds, operate and control system functions without professional intensive training;

Maintenance and maintenance：Bently Nevada 24701-16-10-15-114-00-02 Regularly clean and inspect the equipment, focusing on whether the sensor connection line is loose or damaged, the fixing of each component, etc., to ensure the integrity and stability of the system hardware. At the same time, the system should be properly calibrated and maintained according to the prescribed cycle, and the software version should be updated in time to achieve the expected measurement accuracy and functional efficiency, extend the service life of the equipment, and ensure long-term stable and effective support for industrial production.