Bently Nevada 24701-16-10-15-124-00-02

1.Technical Parameters

Measurement Channels：Bently Nevada 24701-16-10-15-124-00-02 has 16 precision measurement channels to simultaneously monitor multiple parameters such as shaft vibration, shaft displacement temperature, etc. at multiple key parts of the equipment, thereby covering the key monitoring points of the equipment and providing rich data for comprehensive evaluation of the equipment status. 

Sampling frequency: The sampling rate of 10kHz ensures that subtle changes and transient signals during the operation of the equipment are quickly captured. This means that no high-frequency vibration spikes or even slow changes in low frequencies will be missed, providing a solid data foundation for accurate diagnosis. 

Measurement accuracy: For vibration measurement, the absolute displacement accuracy can reach ±0.025 mm; the speed can reach ±0.025 mm/s; the acceleration can reach ±0.25 m/s2; the temperature accuracy is about ±1°C. Such measurement accuracy may be the greatest possibility for users to understand the operating status of the machine and deal with subtle anomalies in a timely manner.

2. Functional features

Real-time monitoring and early warning: Bently Nevada 24701-16-10-15-124-00-02 monitors various parameters of the equipment in real time and around the clock. Once the data deviates from the normal range, an audible and visual alarm will be issued immediately, and the early warning information will be transmitted to the dispatch room or relevant personnel through a variety of communication interfaces (such as Ethernet, RS485, etc.) so that immediate measures can be taken to avoid further degradation of the equipment.

Data Analysis Diagnosis：Bently Nevada 24701-16-10-15-124-00-02 has built-in advanced data analysis algorithms, which analyze the collected data in time domain, frequency domain, and trajectory axis. It can accurately identify common failure modes such as equipment imbalance, misalignment, and bearing wear, and generate detailed diagnostic reports to help maintenance personnel quickly find the root cause of the failure and develop efficient maintenance plans.

Data Storage and Management：Bently Nevada 24701-16-10-15-124-00-02 provides large-capacity storage capabilities, which can continuously save the historical operation data of the equipment for a long time, so that users can trace the operation history of the equipment at any time, compare and analyze the data at different stages, and analyze the possible laws in the operation of the equipment, which provides important support for the optimization of maintenance strategies and predictive maintenance.

3. Installation and Use

Installation environment requirements：Bently Nevada 24701-16-10-15-124-00-02 should be installed in a dry and well-ventilated place, away from strong electromagnetic interference sources, to ensure stable operation of the system. The installation of the sensor should be connected in strict accordance with the operating procedures so that it can match the corresponding monitoring components of the equipment and obtain reliable and accurate measurement results.

Operation interface: The operation interface of Bently Nevada 24701-16-10-15-124-00-02 is designed to be interruptible and easy to operate. Users can easily set parameters, view data, adjust alarm thresholds, etc., lower the threshold for use and improve operating efficiency. 

Maintenance and care: Clean the equipment regularly, check whether the sensor connection line is loose or damaged, and whether the components are firmly fixed to ensure that the system hardware is intact and reliable. Calibrate and maintain the system according to the prescribed cycle, and update the software version in time to make the measurement more accurate and minimize changes during long-term use, providing continuous monitoring assistance for industrial production.