Bently Nevada 24765-02-00

Technical Parameters

Measurement Channels: Bently Nevada 24765-02-00 has two independent measurement channels that can monitor different parts of the equipment or different categories of parameters at the same time. For example, it can monitor the vibration and temperature of the shaft at the same time, and provide the required multi-dimensional data support for a comprehensive understanding of the health of the equipment.

Measurement accuracy:Bently Nevada 24765-02-00 has a displacement accuracy of ±50 μm, a velocity accuracy of ± 3 mm/s, and an acceleration accuracy of ± 3.6 m/s² for vibration measurement. It can record very subtle vibration changes during the operation of the equipment with extremely high resolution. For temperature measurement, it can reach ±120°C to ensure timely monitoring of the temperature status of the hand.

Sampling frequency: Bently 24765-02-00 has a high sampling frequency, which meets the requirements of signal acquisition during the operation of current industrial equipment. At the same time, it can capture rapidly changing signal characteristics and provide complete and accurate data basis for subsequent data analysis. The specific sampling frequency can be flexibly adjusted and optimized according to the actual application scenario.

Functional characteristics 

Real-time monitoring function: 24-hour real-time monitoring of equipment parameters provides intuitive data for operators, allowing them to understand the operation of the equipment in a timely manner and discover abnormal fluctuations or trend changes.

Diagnostic Capabilities: Bently Nevada 24765-02-00 uses built-in analysis algorithms to conduct detailed analysis of collected data, automatically identify various common fault modes, such as equipment imbalance, shaft misalignment, ball bearing failure, etc., and generate fault diagnosis reports as a guide for the maintenance team to quickly isolate and determine the source of the fault, thereby improving maintenance efficiency.

Data Storage and Transmission: Bently Nevada 24765-02-00 has a certain data storage capacity, which can save the historical operation data of the equipment for subsequent query and analysis. In addition, it also has a variety of data transmission interfaces such as Ethernet and RS485, through which data can be transmitted to a remote monitoring center or other management systems to achieve remote monitoring and centralized management of the equipment.

Installation and Use 

Installation Area Requirements: Must be installed in a dry, ventilated environment without strong electromagnetic interference to provide amplitude and accurate measurement. The sensor should be installed strictly in accordance with its operating guide to ensure good contact and coupling with the unit to obtain the most reliable measurement data.

Operation interface: Bently Nevada 24765-02-00 is equipped with a simple and clear operation interface. Users can easily set parameters, view data, set alarm thresholds, etc., without complicated training.

Maintenance and care 

The equipment should be cleaned and maintained regularly, paying special attention to the looseness or damage of the sensor connection line and the heat dissipation of the instrument. Calibrate the instrument regularly and at the prescribed time to keep the measurement accuracy in the best state, extend the service life of the instrument, ensure its long-term stable and reliable use, and continuously provide accurate monitoring services for industrial production.