Bently Nevada 330173-00-03-10-02-00
  • Bently Nevada 330173-00-03-10-02-00 Bently Nevada 330173-00-03-10-02-00

Bently Nevada 330173-00-03-10-02-00

Brand: Bently Nevada
Description: 330173-00-03-10-02-00
Condition: Brand New
Certificate: COO TEST REPORT WARRANTY LETTER
Warranty: 1 year
Inventory Qty: 10
Payment Term: T/T
Shipping Port: Shenzhen
Bently Nevada 330173-00-03-10-02-00 Non-contact shaft-position and vibration monitoring on rotating equipment.

Send Inquiry

Product Description

Manufacture 
Bently Nevada  
Model Number 
330173-00-03-10-02-00
Ordering Number 
330173-00-03-10-02-00
Catalog
3300 5 MM
Description
Proximity Probes
Country Of Origin
USA
HS CODE
85389091
Dimension
1 (M)
Weight
0.71 kg


Ordering Information

Model
330173 
330173 3300 5 mm Probe, M8 x 1 thread, without armor 
Unthreaded Length Option 
00 
0 mm
Overall Case Length Option
03
30 mm
Total Length Option 
10 
1.0 metre (3.3 feet)
Connector Option 
02 
Miniature coaxial ClickLoc connector, standard cable
Agency Approval Option
00
Agency Approval Option


Technical Parameters

Linear Range: 1.0 mm (40 mils) full-scale for Bently Nevada 330173-00-03-10-02-00

Sensitivity: 50 mV/µm (125 mV/mil) ± 5% at –23 V DC excitation

Output Span: –2 V to –12 V DC over linear range

Linearity: ± 1 % FS

Frequency Response: DC to 10 kHz (–3 dB)

Operating Temperature:

Probe: –35 °C to +125 °C with Bently Nevada 330173-00-03-10-02-00

Cable: –20 °C to +80 °C (PVC)

Environmental Seal: IP65 when mated

Pressure Rating: Requires external bulkhead/thermowell for pressurized service


Product function

Bently Nevada 330173-00-03-10-02-00 converts minute air-gap changes between probe tip and rotating target into proportional AC voltage. This signal is carried via shielded cable to Proximitor® modules for linearization, digitization, and real-time clearance/vibration analysis.


Application Areas

Steam & Gas Turbines: Early rub and clearance alarms in high-speed bearings using Bently Nevada 330173-00-03-10-02-00

Compressors & Pumps: Surge-control and shaft-alignment monitoring with Bently Nevada 330173-00-03-10-02-00

Generators & Motors: Dynamic imbalance and thrust position surveillance

Research & Test Rigs: High-fidelity vibration studies via Bently Nevada 330173-00-03-10-02-00

OEM Skids & Panels: Tight-space installations requiring minimal probe intrusion


Hot Tags: Bently Nevada, 330173-00-03-10-02-00, Proximity Probes

Related Category

Send Inquiry

Please Feel free to give your inquiry in the form below. We will reply you in 24 hours.
X
We use cookies to offer you a better browsing experience, analyze site traffic and personalize content. By using this site, you agree to our use of cookies. Privacy Policy
Reject Accept