Bently Nevada 330180-51-00
  • Bently Nevada 330180-51-00 Bently Nevada 330180-51-00
  • Bently Nevada 330180-51-00 Bently Nevada 330180-51-00
  • Bently Nevada 330180-51-00 Bently Nevada 330180-51-00

Bently Nevada 330180-51-00

Brand: Bently Nevada
Description: Proximity Sensor
Condition: Brand New
Certificate: COO TEST REPORT WARRANTY LETTER
Warranty: 1 year
Inventory Qty: 4
Payment Term: T/T
Shipping Port: Shenzhen
Bently Nevada 330180-51-00 Proximity Sensor is primarily used for mechanical condition monitoring in scenarios where installation space is limited (e.g., small aperture, side or rear view mounting restrictions). Designed to replace both the 3300 RAM Sensor System and the 3000/7000 Series 190 Sensor System, it supports upgrades from older systems (existing probes and cables can be reused when upgrading the 3300 RAM, while upgrading the 3000/7000 Series requires replacing them with NSv components).

Send Inquiry

Product Description

Manufacture
Bently Nevada
Model Number
330180-51-00
Ordering Number
330180-51-00
Catalog
3300XL
Country Of Originx
United States (US)
HS CODE
9031809090
Dimension
8*4*2.5cm
Weight
0.35kg

Product Features

Bently Nevada 330180-51-00 Proximity Sensor allows radial vibration monitoring, with orthogonally mounted double probes (e.g. turbine bearing housing).

Bently Nevada 330180-51-00 Proximity Sensor can axial displacement monitoring with single probe measuring thrust disk position (e.g. compressor).

Bently Nevada 330180-51-00 Proximity Sensor can be rotational speed or phase referenced, with a keyed phasor (e.g. 330801) to provide a trigger signal.


Product Functions

Installation Flexibility:

Bently Nevada 330180-51-00 supports high-density DIN rail mounting or traditional panel mounting without special tools.


Immunity:

Bently Nevada 330180-51-00 enhanced RFI/EMI immunity allows it to be certified by the European Union for CE marking without the need for special installation to avoid interference from high-frequency radio signals.


Ease of Wiring:

Bently Nevada 330180-51-00 is equipped with SpringLoc terminal blocks for fast, robust field wiring without special tools.


Compatibility:

Bently Nevada 330180-51-00 is mechanically and electrically compatible with 3300 NSv probes and extension cables, and can be reused with existing probes and cables in 3300 RAM systems (when upgrading).


Electrostatic Protection:

Bently Nevada 330180-51-00 terminals and connectors are protected against electrostatic discharge (ESD), but should still be handled with care to prevent static electricity.The drawing and table below include the YOKOGAWA EC401-10


Product Parameters

Input Voltage: -23 Vdc to - 26 Vdc (with protective barrier)

Supply Sensitivity: ≤ 2 mV change in output voltage for every 1 V change in input voltage

Output Resistance: 50Ω

Average Scaling Factor: 7.87 V/mm (200 mV/mil, common output for eddy current sensors)

Linear range: 1.5 mm (60 mils), range 0.25 mm to 1.75 mm (10 to 70 mils), corresponding to an output voltage of - 1 to - 13 Vdc

Operating Temperature: -52°C to + 100°C (-62°F to + 212°F)

Storage Temperature: -52°C to + 105°C (-62°F to + 221°F)

Relative Humidity: 100% condensation (non-submerged, with connector protection)


Hot Tags: Bently Nevada, 330180-51-00 Proximity Sensor

Related Category

Send Inquiry

Please Feel free to give your inquiry in the form below. We will reply you in 24 hours.
X
We use cookies to offer you a better browsing experience, analyze site traffic and personalize content. By using this site, you agree to our use of cookies. Privacy Policy
Reject Accept