Bently Nevada 74712-01-10-02-00

1.Technical parameter

Measurement channel: The high-precision measurement channel within the Bently Nevada 74712-01-10-02-00 allows the input sensor to perfectly measure specific parameters of key parts of its components, such as shaft vibration, shaft displacement or temperature, and other parameters that provide appropriate basic key data for equipment status assessment.

Sampling frequency:Bently Nevada 74712-01-10-02-00 sampling frequency can reach 10 kHz, which can instantly capture instantaneous changes in equipment in a time less than or equal to a few milliseconds. No matter how small or short-lived the fluctuations are, an accurate and reliable measurement system must be able to measure them in order to effectively analyze the equipment status during the fault determination process.

2.Measurement Accuracy

Displacement resolution:  ± 0.025 mm, velocity resolution: ± 0.025 mm/s, acceleration resolution: ± 0.25 m/s². 

Temperature resolution is typically no better than ± 1°C. This high quality allows for accurate assessment of subtle machine operating parameter changes, helping to detect potential faults before they become serious problems.

3.Function

Real-time Monitoring and Alarm: Bently Nevada 74712-01-10-02-00 continuously monitors equipment operating parameters in real time, when data exceeds the set threshold, it will initiate sound and visual alarms, and transmit the alarm status to the control center through the selected communication options (Ethernet, RS485, etc.) so that the data can be routed to the surface in time for actions to detect, characterize and avoid deteriorating failure modes, thereby ensuring production safety. 

Data Analysis and Diagnosis : data analysis and diagnosis are enabled by built-in advanced algorithms that support various methods of processing collected data - data in electrical signals, time, frequency and amplitude.Bently Nevada 74712-01-10-02-00 investigates equipment through data mining and accurately determines various common mechanical faults such as imbalance, misalignment and bearing wear, in addition to providing diagnostic insight reports to assist maintenance engineers in finding any root causes, thereby formulating appropriate corrective plans.

Data Storage and Transmission: The large data storage capacity allows you to save many operation histories to meet the needs of users for data search, playback, analysis, etc., and track the performance status changes of the equipment, thereby providing information to support equipment maintenance optimization. At the same time, it is able to support various data transmission methods, so as to easily integrate the monitoring data into the factory control management system to achieve remote monitoring and centralized management.

Environmental requirements for installation: For the normal operation of Bently Nevada 74712-01-10-02-00, the installation should be carried out in a dry and ventilated environment, away from strong electromagnetic interference sources. The sensor installation must be carried out strictly in accordance with the operating instructions to ensure the correct contact between the sensor and the equipment that needs to accurately measure the data. 

Operation interface:Bently Nevada 74712-01-10-02-00 provides a simple and clear user interface, users can easily set parameters, monitor real-time data or data logs, adjust alarm threshold levels, and operate system functions without professional programming knowledge. Very easy to use. 

Maintenance and care: clean and inspect the equipment, because the sensor connection line may be damaged or loose. At the same time, calibration should be carried out at the prescribed intervals to ensure the stability of measurement accuracy, extend the service life of the equipment, and ensure uninterrupted and stable monitoring during the production process.