ABB YXE152A

Details

Detailed performance parameters:

Measurement accuracy:

The temperature measurement accuracy can be as good as ±0.2°C

Pressure measurement accuracy

ABB YXE152A is ±0.1% full scale and works well under pressure monitoring for precise pressure monitoring cases,.

Measurement accuracy

ABB YXE152A approximately ±0.6% reading, which is of high accuracy in liquid or gas flow measuring.

Operating temperatures:

ABB YXE152A can function steadily from -10 degrees centigrade to 40 degrees centigrade in an ambient environment, thus fitting in most regular industrial environments indoors and outdoors.

Voltage and frequency adaptability:

ABB YXE152A works off a 24V DC power supply, which is quite likable as far as industrial DC power supply systems are concerned, frequency adaptability is 50Hz-60Hz, which allows it to operate stably in a standard industrial frequency environment.

Response time:

Common signal response times will, on average, not exceed six milliseconds, allowing for the rapid detection of changes to parameters in industrial processes, ensuring control and operation are precise and responsive in all production processes.

Functional features:

Data acquisition function:

Multi-channel data acquisition capability allows it to receive multiple analog signals at a time which include: 0-10V voltage signals, 4-20mA current signals, thermocouple signals, and thermal resistor signals, among others.

Data processing and analysis functionality:

The in-built high-performance data processing unit may analyze the collected data in real-time, effectively resists noise interference and boosts the accuracy of the data, better reflecting the real state of an industrial process. Has the capacity for storing historical data, which is used for the convenient retrieval and viewing by the user at any time.

ABB YXE152A incorporates an analog output channel in which control signals of between 0-10V or 4-20mA may be loaded, offering precise control of valves, pumps, motors, and frequency converters to effect fully adjustable process parameters such as flow, pressure, and velocity to best guarantee that the industrial production process observes the pre-set process requirements and different scenarios' fine control demands.

Communication.

A whole variety of communication protocols are supported: few MODBUS RTU, ,PROFIBUS DP, etc, i.e, upper-cell control systems like PLC, DCS, and others with intelligent coding: building an entire industrial automation network, the capacity for remote transmission, centralized data management, and cooperation, enhancing the industrial production-wise "intelligent" level.

Technical Features

Sensor fusion technology:

ABB YXE152A puts into use the advanced sensor fusion techniques and, therefore, numerous other types of sensors into one compact module with the assimilated data fused into the algorithms processing, effectively improving the measurement accuracy and reliability.

Modular design concept:

ABB YXE152A is following a modular design concept, whereby functional modules such as data acquisition, processing, control output, and communication are designed independently and integrated within one chassis. It greatly increases the convenience of equipment maintenance and upgrades,

Redundancy in design and reliability enhancement:

Power modules and communication modules have redundancy back-ups, the back-up module automatically coming into effect when a fault occurs in the main module; to guarantee continuous and levelled operations of the equipment while effectively improve product reliability and fault tolerances.

The software deployability module.

In general, users can parametrize the equipment through dedicated configuration software, consisting of configuration of data acquisition channels, setting of controlled strategy adjustment, and setting of communication parameters, etc.