Bently Nevada 177230-02

Product Overview

Model: 177230-02

Product Type: Seismic Vibration Sensor

Measurement Range: 0 - 50.8 mm/s (0 - 2.0 in/s)

Frequency Response: 3 Hz to 1 kHz (180 to 60 kcps peak)

Electrical Isolation: Greater than 108 ohms

Operating Temperature Range: -40°C to + 85°C (-40°F to + 185°F)

Connector: 3-pin Mil-C-5015, 316L stainless steel

Case Material: 316L stainless steel

Height: 66.0 mm (2.60 in)

Diameter: 25.4 mm (1.00 in)

Product Advantages

Non-contact measurement: Bently Nevada 177230-02 requires no physical contact with the machine housing, eliminating wear and tear, protecting the sensor while maintaining normal machine operation.

Precise measurement: Bently Nevada 177230-02 provides accurate and repeatable vibration data, uses a simple data format, and can also output the raw vibration signal.

Widely compatible: Bently Nevada 177230-02 seamlessly integrates with a variety of control systems, including programmable logic controllers (PLCs), distributed control systems (DCSs), and supervisory control and data acquisition (SCADA).

Application

Power Industry: Bently Nevada 177230-02 used in steam turbines, generators, and other equipment to monitor vibration, promptly detect potential failures caused by abnormal vibration, and ensure stable operation of power equipment.

Petrochemical Industry: Bently Nevada 177230-02 is suitable for compressors, pumps, and other equipment, monitoring vibration in real time to prevent interruptions in chemical production due to equipment failure.

Note

Installation specifications: Install strictly according to the product manual to ensure that the sensor is firmly installed and avoid damage such as collision and extrusion during installation. The installation location should avoid high temperature and strong electromagnetic interference areas.