Brand: Bently Nevada Description: High Temperature Velomitor System Condition: Brand New Certificate: COO TEST REPORT WARRANTY LETTER Warranty: 1 year Inventory Qty: 10 Payment Term: T/T Shipping Port: Shenzhen The Bently Nevada 330752-25-CN is a Velocity high-temperature piezoelectric velocity sensor system. This system features an innovative design that permanently connects the sensing element to the signal conditioning electronics via a rugged 2.5 meter hard-wire cable.
|
Manufacture |
Bently Nevada |
|
Model Number |
330752-25-CN |
|
Ordering Number |
330752-25-CN |
|
Catalog |
3300XL |
|
Country Of Origin |
America |
|
HS CODE |
8414909090 |
|
Dimension |
15*15*5CM |
|
Packing Dimension |
18*18*8CM |
|
Weight |
2 kg |
Product Overview
Product Type: High-temperature piezoelectric velocity sensor system.
Sensitivity: 5.7 mV/mm/s (145 mV/in/s) ±5%.
Frequency Response: 15 Hz to 2 kHz ±3.0 dB, 20 Hz to 1 kHz ±0.9 dB.
Maximum sensor head mounting surface temperature: -55°C to +400°C (-67°F to +752°F).
Electronics operating temperature range: -55°C to +121°C (-67°F to +250°F).
Cable Length: 2.5 m (8.2 ft) standard.
Housing Material: 300 series stainless steel.
Connector: 2-pin Mil-C-5015 sealed receptacle, 304 stainless steel housing.
Shock Resistance: Withstands 24,535 m/s² (2500 g) peak shock.
Humidity acclimation: 100% non-immersion environment.
Product Features
Bently Nevada 330752-25-CN use unique split design enables the sensor head to operate continuously at temperatures up to 400°C.
Bently Nevada 330752-25-CN have sensitivity of 5.7 mV/mm/s combined with a wide frequency response range accurately captures subtle vibration changes in equipment from low to high speeds.
Bently Nevada 330752-25-CN use stainless steel housing is shock- and corrosion-resistant, ensuring long-term stable operation in harsh industrial environments.
Bently Nevada 330752-25-CN have no connectors are required between the sensor head and the electronics, eliminating common points of failure.
Applications
Bently Nevada 330752-25-CN used for vibration monitoring in the hot-end area of gas and steam turbines, this system provides real-time visibility into equipment operating status and prevents problems such as imbalance, misalignment, and bearing wear.
Bently Nevada 330752-25-CN suitable for vibration monitoring of large compressors, pumps, fans, and other equipment.
Note
Installation environment: Avoid installation in strong magnetic or electric field environments to prevent signal interference. The installation location should be free from severe mechanical shock to avoid damage to the sensor.
Calibration and Maintenance: Calibrate the sensor at the prescribed intervals, using original calibration equipment and standard components to ensure measurement accuracy. Always disconnect the power supply during maintenance to avoid electric shock and equipment damage.
