Triconex 4000093-310

Details

Product Description of Triconex 4000093-310：

Triconex 4000093-310 is a powerful industrial automation product. It belongs to the triple redundant module of the main processor and is an important component of the modern fault-tolerant controller based on the Triple Modular Redundancy (TMR) structure. Its application fields cover industrial control systems such as Distributed Control System (DCS) and Programmable Logic Controller (PLC).

Triconex 4000093-310 has the following characteristics:

Advanced Architecture

It adopts the Triple Modular Redundancy (TMR) architecture. From input to output, it has a completely triple-modular layout, and each stage has three independent "branches". This layout enables the system to maintain correct and continuous control when components experience serious failures or internal and external transient failures, greatly improving the reliability and stability of the system and effectively guaranteeing the uninterrupted operation of the industrial production process.

Efficient Data Processing and Communication Capabilities

Once each channel of the module reads the process data, it will send the information to its corresponding main processor. The three main processors communicate with each other through a dedicated high-speed bus system. During each scan, they will also synchronize and exchange data with the two adjacent main processors. The module will conduct voting on the digital input data and send copies of the analog input data to each main processor during the decision-making process. After the main processor runs the control program, it will send its output to the output module. The output data will be voted again on the output module closest to the field. In this way, any errors that occur between the voting process and the final output to the field can be detected and compensated for, thus realizing accurate data processing and efficient transmission.

Flexible Hot Standby Function：

The system provides a hot standby module for each I/O module. Therefore, once a normally operating module detects a failure, the hot standby module can almost immediately take over the control, avoiding system shutdown caused by module failures and improving the availability of the system. In addition, the hot standby position can usually be used for online maintenance, enhancing the maintainability of the system and reducing the impact of system maintenance on the production process.

The technical parameters of Triconex 4000093-310 are as follows:

Working Voltage

An ordinary working voltage is applicable to the normal industrial power supply environment, which can continuously provide reliable power support for the stable operation of the module.

Size and Weight

Its dimensions are 425 × 885 × 748 millimeters, with a weight of 14.55 kilograms and a shipping weight of 12.55 kilograms. The reasonable design of its size and weight makes it convenient for maintenance and does not occupy excessive space.

Working Temperature Range：

Its acceptable working temperature range is quite wide. Although the specific temperature is not clearly stated, it can be inferred that it can adapt to various environmental conditions in the industrial field and ensure stable operation under different temperature states.

Application Fields of Triconex 4000093-310

It has extremely wide applications in numerous modern industrial fields, such as power, petroleum, mine hoisting, ports, heating, gas supply, water supply, sewage treatment, metallurgy, papermaking, textile, chemical industry, and water conservancy. It also plays a very important role in various industrial control fields, such as the DCS monitoring system of power plants, intelligent flat-tempered glass furnace systems, PLC programmable conveyor control systems, DCS distributed control systems, intelligent fire-fighting water supply control systems, and computer-controlled constant-flow liquid medicine systems in chemical plants. It also helps to achieve closed-loop control and unified management of the industrial production process, thereby improving the efficiency, quality, and safety of production activities, reducing production costs, and minimizing safety risks.

Product Advantages of Triconex 4000093-310

Easy to Integrate

This product has the characteristics of "connect, command, control" ready-to-use type. With industrial packaging and a comprehensive software toolkit, it greatly reduces the integration workload, shortens the time to market, and provides great convenience for Original Equipment Manufacturers (OEMs) to flexibly and efficiently design and apply this module to various industrial automation systems.

High-Performance Algorithm Advantage：

With its unique multi-processor architecture, it adopts powerful control algorithms to achieve the best performance among similar products and meet the strict requirements of high-precision control and fast response in the industrial production process.

Universal Servo Drive Technology

System designers can easily integrate and control most types of motors and worktables, including brushed, brushless, voice coil, and stepper motors, making the application range of the product wider, the design more flexible, and providing more options for the construction of industrial automation systems.