EPRO PR6423/014-010

Technical Parameters

Thread length:65mm

Linear Measurement Range: 2 mm (80 mils)

Initial Air Gap: 0.5 mm (20 mils)

Minimum Shaft Diameter: 25 mm (0.79”)

Target Material (Ferromagnetic Steel) :42CrMo4 (AISI/SAE 4140) Standard Other (On Request)

Protection Class: IP66, IEC 60529

Operating Temperature Range: Sensor incl. 1m Cable: -35 to +180°C (-31 to 356°F) Cable & Connector: -35 to +150°C (-31 to 302°F)

Material: Sensor Tip (PEEK Polyether Ether Ketone), Case (Stainless Steel) Cable (PTFE Polytetrafluoroethylene), Connector (Brass, nickel-plated)

Compatible Systems

The EPRO PR6423/014-010 pairs with industry-leading monitoring and control solutions:

Condition Monitoring Platforms: Integrates with Emerson’s AMS Suite or third-party systems like MMS 3000 series for predictive maintenance and fault diagnostics. The CON021 converter ensures stable signal transmission, reducing downtime risks.

Adapter Interfaces: Supports LEMO connectors or open cable ends, allowing flexible installation in both standard and reverse-mount configurations.

Typical Use Cases

Turbine Shaft Monitoring: In power generation, the EPRO PR6423/014-010 tracks rotor axial displacement and vibration, preventing catastrophic failures in steam turbines.

Compressor Health Analysis: Deployed in oil and gas facilities, it detects bearing wear or imbalance in centrifugal compressors, ensuring operational safety and compliance with ISO standards.

Pump and Fan Diagnostics: Monitors shaft eccentricity in industrial pumps and fans, enabling proactive maintenance in water treatment and HVAC systems.

Installation & Maintenance

Installation Guidelines: Mount using M10x1 or 3/8-24UNF threads with a recommended 1–2 mm gap from the target surface. Shielded cables minimize electromagnetic interference, crucial for accurate readings.

Maintenance Best Practices: Calibrate annually using certified tools to maintain precision. Regularly clean the sensor tip to prevent dust buildup. For troubleshooting, inspect cable integrity and connector stability if signal anomalies occur.

We also supply other models of this products: PR6423/018-010. They are the same in specifications, features and application range. The difference is the total length of the cable and thread length, refer to the table for details.