EPRO PR6426/010-140

Operating Parameters

Operating Voltage: Typically 24V DC, but some models may range from 12V to 36V DC, mainly because a given industrial setting uses different operating power supplies depending on the regional location.

Output Frequency: The EPRO PR6426/010-140 has an output frequency of 10 kHz under given measurement conditions, which can quickly capture data to enhance real-time monitoring and analysis.

Detection Range: The range of detection values depends on the scale of the model; for example, the detection range of model PR6426/010 - 140 is between 0 mm and 140 mm, while the detection range of PR6426/010 - 130 is 0.5 mm to 100 mm.

Accuracy: The accuracy of the PR6426/010-140 is relatively high, with some models having an accuracy of ± 1% of full scale, while others have an accuracy of ± 0.1% or ± 0.5% of full scale, depending on the configuration and requirements.

Resolution: Some models have a resolution of 0.1 mm and are able to provide measurements beyond these ranges with an accuracy of a fraction of a millimeter. Such applications are very important in applications that require high-precision working behavior.

Operating temperature: The EPRO PR6426 is expected to operate and survive in a typical temperature range of -40 degrees Celsius to +85 degrees Celsius; in some cases, even up to 125 degrees Celsius, allowing use in environments with extreme temperature changes, such as modern industrial environments.

Environmental protection: With a standard IP67-compliant structure, the EPRO PR6426 is completely waterproof and dustproof, ensuring long-term use even in wet, dirty and dusty conditions.

Product features

High-precision measurements: The EPRO PR6426 sensor, together with the relevant preamplifier (such as the CON021/916 - 200), can measure shaft vibration, displacement, position, eccentricity and other relevant parameters of rotating machinery. This non-contact method not only allows extremely accurate readings, but also requires no contact, so the system has longer reliability due to the fact that there is no wear and tear caused by continuous use in contact measurement.

Signal conversion and amplification: The preamplifier overcomes the very weak signal of the sensor by converting and amplifying the weak sensor signal, thus achieving a good and stable measurement process; the filtering part helps to enhance the signal, as does noise and interference.

Easy installation and maintenance: Since it is deployed in an industrial environment, the system has a rugged housing and simpler installation options. This reduces the time and effort spent on installation and maintenance procedures, thereby reducing the associated costs.

Application Scope

The EPRO PR6426/010-140 is widely used in countless areas of industry. It is most commonly used for the monitoring of turbomachinery, including steam turbines, gas turbines, compressors, pumps and fans, where accurate measurement of shaft vibration and displacement is essential to ensure the safe operation and reliability of the equipment. It enables the production of automated industrial equipment to be controlled with good accuracy, thereby improving the productivity and quality of the product. It can not only be used as a static voltage measurement device, but also for other purposes, such as in the automotive industry for engine testing and in production for the quality of machined parts.

•We also supply other models of this products: PR6426/010-140.They are the same in specifications, features and application range. The difference is the total length of the cable,refer to the table for details.

DataSheet DownLoad