GE 259B2460ARG1

Functional Characteristics

Control Function: GE 259B2460ARG1 is used primarily in GE Speedtronic series control system, to achieve accurate control of gas turbines and steam turbines. It neutralizes and calculates these sensor signals including temperature signal, pressure signal, speed signal, etc received, and calculates and processes through internal algorithms, outputting control signals to adjust the fuel flow rate, inlet guide vane angle, etc of the turbine, so as to maintains stable operation of the turbine.

Data Monitoring and Recording: GE 259B2460ARG1 performs the function of data monitoring and recording, which can monitor not only the 650 °C exhaust gas temperature, but also the corresponding vibration value recorded in real - time. Meanwhile as it can record historical data to facilitate users to query and analyze the operating status of the equipment at any time, and provide a reference for equipment maintenance and fault diagnosis.

Fault Diagnosis and Alarm: GE 259B2460ARG1 has a built - in fault diagnosis function, and can quickly detect abnormal conditions in the turbine operation process, such as over - temperature, over - pressure and low - oil pressure. The instant a fault exists, it will immediately issue alarm signals and take corresponding protection measures, such as tripping the turbine, to prevent equipment from being damaged.

Operation Methods

Installation: Disabling power first After that, it should be installed in the control cabinet per the installation instructions, and secured with screws. Follow the wiring diagram to connect the power line, communication line and sensor line. Make sure the connection is firm and reliable.

Parameter Setting : The parameters can be set by the upper - computer software or local control panel. First enter the parameter setting interface, and then set the relevant parameters according to specific application requirements, such as the setpoint of turbine speed, the upper and lower limits of temperature, and the control parameters of fuel flow. Save the parameters once the setting has been done.

Equipment Operation Detection: When the equipment is running, the running status of GE 259B2460ARG1 can be monitored using the indicator lights on the panel and with monitoring software. Monitoring software: You need to pay attention to observe whether the indicator lights are normal, whether there is abnormal data. If an abnormality is found, the equipment should be stopped in time for inspection and troubleshooting.

Application Areas

Energy industry: Primarily used in thermal power plants, gas - fired power plants and other power - generation equipment. GE 259B2460ARG1 is used for controlling the operation of gas turbine and steam turbine, realize power generation output adjustment, ensure power supply stability and reliability. The innovation behind this system can also be used in the control system of equipment to generate wind power, thus promoting the efficiency of wind generation.

Industrial Manufacturing: It can be used to control the operation of various motors, valves and other equipment, which can achieve precise control of production process and improve product quality in industrial production lines that require high - precision control, such as the manufacture of chemical equipment, metal processing paper making.

Oil and Gas Industry: In the process of extracting and refining oil and gas, it is used to control the traditional turbines in natural gas compressor stations and oil – field power – supply systems. GE 259B2460ARG1 is possible to adjust the output power of the turbines according to the change of gas production and oil production,Reduce energy consumption.