Brand: GE Description: TERMINAL BOARD INTERFACE Condition: Brand New Certificate：COO TEST REPORT WARRANTY LETTER Warranty: 1 year Inventory Qty: 5 Payment Term: T/T Shipping Port: ShenZhen GE 44A736424-001 is an internal serial port expansion card designed to enhance the serial communication capabilities of industrial control systems. Multiple serial devices can be connected to the control system, increasing its flexibility and scalability.
|
Manufacture |
GE |
|
Model Number |
44A736424-001 |
|
Ordering Number |
44A736424-001 |
|
Catalog |
Mark V |
|
Country Of Origin |
USA |
|
HS CODE |
85389091 |
|
Dimension |
21cm x 15cm x 2.5cm |
|
Packing Dimension |
25cm x 18cm x 5cm |
|
Weight |
0.5kg |
Input Voltage: 24V DC.
Operating Temp: -20°C to 70°C .
Humidity: Up to 95% relative humidity (non-condensing) operating relative humidity.
Communication Protocols: Compatible with industry-standard protocols like Ethernet, RS-232, or RS-485 to allow easy integration into control systems.
Battery Consumption: Consumes less battery to be more power efficient and generates less heating.
Product Features
Signal Processing: The GE 44A736424-001 handles both analog and digital signals from sensors and other input devices, ensuring that data is interpreted accurately.
Execution of Control Logic: GE 44A736424-001 executes control logic for turbine functioning, and regulating its speed, temperature and pressure.
Fault Detection: The GE 44A736424-001 can be equipped with diagnostics that can detect and report system faults.
Data Communication : Performs communication from turbine control system to other external devices or networks.
Redundancy Awareness: Operates within redundant topologies to maximize system reliability and availability.
Installation
Perform a few checksBefore you install: Make sure the power supply to the system is switched off. Check if compatible with current control system. Incompatible hardware can lead to board damage or other physical issues.
Mounting:Follow the steps below to mount the board in the control cabinet. Ensure style govern by bond torrential bolts and mountings.
Wiring:Follow the wiring diagram from the technical manual to wire the input and output cables Good Grounding wiring to avoid electrical ingnition
Power-Up:Power on the system and check that the board has been detected by the control system.So, check with diagnostic test.
Application range
Power Generation: Makes sure turbines at power plants work effectively and reliably.
Oil and Gas: GE 44A736424-001 Used in turbine control systems in compressor stations and refineries.
Industrial Manufacturing: Industrial Manufacturing, large scale manufacturing device used to run turbine operations
Renewable Energy: GE 44A736424-001 Works in harmony with hybrid energy systems for efficiency.
Troubleshooting
No Power:Verify that the power supply connections are secure and the voltage is correct. Check the fuse on the board is not blown.
Communication Failure:Check the integrity of communication cables and connectors. Configure the correct communication protocol.
Fault Indicators:Refer to the diagnostic LEDs on the board to identify specific fault codes.
Overheating: Control cabinets should have proper ventilation and heat management. Look for an excess of dust or debris that might be blocking air flow.
Signal Errors:Check input and output connections for loose or damaged wires.So be sure to calibrate your sensors and input devices to get a true signal.
