Brand: GE Description: Turbine Control Card Condition: Brand New Certificate：COO TEST REPORT WARRANTY LETTER Warranty: 1 year Inventory Qty: 5 Payment Term: T/T Shipping Port: ShenZhen GE DS215DMCBG1AZZ03A , used in motor control applications with features like real-time monitoring, fault detection, advanced control algorithms, energy savings and temperature control.
|
Manufacture |
GE |
|
Model Number |
DS215DMCBG1AZZ03A |
|
Ordering Number |
DS215DMCBG1AZZ03A |
|
Catalog |
- |
|
Country Of Origin |
USA |
|
HS CODE |
85389091 |
|
Dimension |
33cm*17.8cm*12cm |
|
Packing Dimension |
36cm*20cm*16cm |
|
Weight |
1.5kg |
Operating Parameters
Input Voltage: 24 VDC.
Output Voltage: 0-240 VAC.
Frequency Range: 50-60 Hz.
Communication Protocols: Modbus RTU, TCP/IP.
Operating Range: -40°C - 85°C.
Power consumption: 25W.
Product Features
Real-time monitoring and control: The device can report real-time data that can be used to view the status of the motor, helping operators monitor motor performance and make adjustments when necessary.
Fault detection and diagnostics: Have diagnostic capabilities to help detect faults or performance issues, allowing for more efficient maintenance practices.
Advanced control algorithms: GE DS215DMCBG1AZZ03A implement advanced control algorithms to optimize motor performance through speed control, torque control and position feedback.
Energy savings: Optimized motor performance in the controller reduces energy consumption.
Temperature control: Devices equipped with temperature sensors and feedback mechanisms ensure that the motor operates within a safe temperature range.
Wide range of applications: GE DS215DMCBG1AZZ03A is capable of controlling various types of industrial motors, including AC and DC motors.
Installation
Installation method: The installation of GE DS215DMCBG1AZZ03A should ensure that there is proper integration between electrical and mechanical components Design environment. Interact with the operating system and display the installation process. Select a mounting location that is free of dust, moisture, or overheating. Ensure that the motor controller is located in sufficient airflow to avoid overheating, confirm that the device is powered by the correct input voltage, and that all devices are properly connected. After that, configure the communication protocol according to the network requirements of the automation system. This includes defining which protocol to use to set up the motor controller to communicate with the central control system.
Mounting type: Suitable for DIN rail or panel mounting.
Troubleshooting
Motor does not start: GE DS215DMCBG1AZZ03A may be insufficient power supply or incorrect wiring. You should check whether the voltage provided is within the specified range and check all connections. Confirm that the motor is in good condition and check whether its wiring is correct.
Overheating: The cause is insufficient ventilation or overwork. You need to ensure that the motor controller is installed in a well-ventilated location and is not affected by high ambient temperatures. Investigate overload conditions and modify the operating conditions of the motor if applicable.
Communication failure: Mainly because of incorrect configuration of communication parameters, you need to verify the communication settings (baud rate, parity, address, etc.) and the configuration of the central control system. Test the continuity and connection of the network cable for correctness
Application range
Power generation: The controllers control motors and motors for hydroelectric and solar power plants.
Petrochemical industry: Used in oil and gas plants to control pumps, compressors, and other motor-driven processes.
Water treatment: Used for pumps, mixers, and aerators in water and wastewater treatment plants.
Transportation: In transportation systems such as railways and airports, these controllers are used to manage HVAC systems, escalators, and baggage handling systems.
