GE IC695CPE305

Operating Parameters

Input Voltage: 5V DC 1A.

Operational Temperature: 0 °C to 60 °C.

Noise: 3% .

I/O Communication Ports: 1 x Ethernet, 2 x Serial (RS232 or RS485), 1 x USB 2.0 host.

Data communication over the Ethernet: 10/100 Mbps.

The new model features: 5MB RAM.

Measurement: 0.72 ms per 1000 Boolean instructions.

Protocols: Ethernet, Genius, PROFIBUS DP, DeviceNet. SNP slave, serial I/O slave, and Modbus RTU slave serial protocols.

Product Features

One Ethernet Communication Port: 10/100 Mbps Receiver, This communication port can be used with programming workstations, human-machine interfaces (HMI), supervisory control and data acquisition (SCADA) systems, third-party hardware and software products, inter-controller messaging and data exchange on the same platform controllers. Besides, the Ethernet port has the ability to be used for OPC UA so that third-party devices can be integrated over the OPC protocol. In addition to Ethernet communication, GE IC695CPE305 integrates two serial ports that comply with the RS232 and RS485 communication standards, and has a USB 2.0, host port, allowing downloading and uploading of user programs from a thumb drive of a smartphone.

High Processing Speed: The processor speed is 1.1 GHz,and the usual scan rate is 0.72 ms per 1000 Boolean instructions, GE IC695CPE305 can quickly process a large number of logic operation and data processing tasks, ensure the real-time performance and high efficiency of the system.

Plenty of RAM: With 5MB RAM and 5MB non-volatile user memory, it provides enough room to hold user programs and data; users can freely develop and expand application programs.

Installation

Mounting: The RX3i universal backplane provides a location for GE IC695CPE305 module to be inserted. Check that the module is seated in place, and the connection is solid.

Note: if module orientation is wrong the module will not go in.

Troubleshooting

Communication Failure: In case of communication failure, the first thing that need to check is the communication cable, make sure it is connected properly and avoid any damages. Then Verify the communication parameters setting to ensure that it is correct, such as the baud rate, data bits, stop bits, and parity bits. Replace the communication cable, swap to connect to another device where possible. In case of Ethernet, ensure the network configuration and IP are set properly.

Program Error: If the program behaves abnormally, first check the program code for errors or logical contradictions. Check the program's running status and variable values with the programming software's debugging tools.

Power Supply Problem: If the module cannot be powered on normally or there is a fault, the first thing we need to check is the power supply voltage, whether it is normal. Next, verify that the power supply cable is connected properly, or not torn. If you can, swap out the power supply to narrow down the issue.

Application range

Industrial Automation: GE IC695CPE305 is mainly used in various production line control systems in the industrial automation field such as automobile manufacturing, food processing, and pharmaceutical production. It refers to a variety of production equipment operation control, real-time monitoring of the production process, according to the program to adjust the production process, improve production efficiency, product quality and production safety. It can also connect to other devices via Ethernet and serial ports and other communication interfaces to realize the integration and coordination of the entire production line.

Building automation: GE IC695CPE305 can be used to control or monitor the operation of various equipment and systems in buildings, such as HVAC systems, lighting systems, and access control systems. It can achieve the automatic control and energy-saving management of buildings through data interaction with sensors, actuators and other devices, so that buildings have higher comfort and energy efficiency.