GE IS200CABPG1BAA

Operating Parameters

Power Supply Voltage: 24 VDC.

Type of Input Signal: 0 - 10 V or 4 - 20 mA.

Ethernet interface, RS-485 interface for serial communication.

I/O Points: 16 digital input points, 16 digital output points, 8 analog input points, and 4 analog output points.

For All Operating Temperature Range: -40°C to 85°C.

Storage Temperature Range: -55°C to 125°C.

Product Features

Multi Interface Ability: GE IS200CABPG1BAA, or board CABP, provides an interface for these boards to permit their activation with external signals. These include — power input, ISBus port, diagnostic tools, front panel instruments and front panel keyboards — which thereby facilitate communication and interaction between the internal boards and external devices.

Error Prevention: No board connections can be plugged into the wrong jacks. The board connections on it usually differ in the connection types, are keyed differently, or have the same pin assignment, so they can be interchanged without causing damage to the board, thus increasing the reliability and stability of the connection.

Slot-Based Management: There are slots specific to CABP board. EX: Slot 1 (BAIA board), Slot 2 (DSPX board), Slot 3 (ACL_ board or GBIA/PBIA mods), Slot 4 (BIC board), and Slot 5 (BPI_ or FOSA board). The operation of multiple boards is orderly installed or powered on through this slot allocation management, ensuring that the entire system runs normally.

Installation

Mark VI Rack Installation: GE IS200CABPG1BAA module racks in a standard 19-inch rack as an addition to the Mark VI system. It is to be inserted into the specific compartment of the rack and attached securely using screws or clips to avoid vibration and displacement problems. Make sure the power of the whole machine should be cut off before the installation, so as to prevent electric shock and damage to the device. After that, according to the requirements, the power supply cable should be connected to the corresponding power supply terminal, and the supply voltage should meet the requirements of the device.

Troubleshooting

Power Failure: When GE IS200CABPG1BAA is not working and there is no power indicator light, check if the power supply cable of IS200CABPG1BAA is inserted well, and check whether the power supply itself has the problem. Examine whether the voltage from the power supply is in range. If the power supply is normal and the board does not have power, it is possible that the fault is caused by the power input circuit of the board.

Advertising Communication Failed: If there is a communication issue with other devices in the system, check the communication cable connection. You should check that the cables are all plugged in tight and that there is no obvious water damage. Verify that the communication parameters (baud rate, data bits, parity bits, etc.) on GE IS200CABPG1BAA and the connected devices match up. If this does not solve the problem, then either a defective communication interface is causing the problem or the software needs closer inspection and debugging.

Abnormality of Signal Input/Output: If the input signal or output signal of GE IS200CABPG1BAA is abnormal, first check whether the signal connection cable of both sides of the connection cable of the output module is loose, blinked or short circuited. After that, ensure that the signal source and connecting device are functioning well.

Application range

Steam Turbine Control: In the case of steam turbine units this component is also of a great importance. And this data conducts regulations on a variety of factors, including but not limited to steam valve vents, rotates the shaft of the turbine, and regulates the speed of the steam turbine for more power generation efficiency. The Mark VI system includes other hardware and software components working synergistically to provide high-reliability operation of steam turbines and enhance overall plant performance.

Industrial Automation: GE IS200CABPG1BAA can be used in various kinds of industrial production equipment and systems, so it is widely applied in the industrial automation. The industrial Internet of Things is widely used in chemical and metallurgical industries, it can realize the control and monitoring of production process, automated equipment operation and process control, improve production efficiency and product quality.