GE IS200DSPXH1DBC

Operating Parameters

Processor Speed: 60 MHz.

Memory: 248 kb RAM, 512 kb flash memory.

Interfaces: 1 backplane connector, 1 vertical pin connector, 1 engineering monitor port , DSP emulator port.

LED Indicators: 2.

Capacitors: 42.

Logic Circuit: Device comprising application-specific integrated circuit.

Coating: Conformal coating.

Operating Temperature Range: -20°C to 70°C.

Product Features

High-speed Signal Processing Capacity:GE IS200DSPXH1DBC comes with a 60 MHz digital signal processor. The processor core is a high-speed processor that allows the board to perform fast processing of many complex digital signals, making high-speed and high-precision control operations possible, and is particularly critical for applications that require real-time processing and high-precision control.

Programmability and Customization: GE IS200DSPXH1DBC has programming and configuration support. You can program the control logic according to the specific requirements of the users through the input port, so that you can achieve the control effect and function of customize. Its highly adaptable nature gives the board the ability to cater to a wide range of control requirements across various industrial applications.

Various interfaces and capabilities: GE IS200DSPXH1DBC has multiple I/O connectors (backplane connector, vertical pin connector, engineering monitor port so on; DSP emulator port ). These adapters are capable to connect and communicate with a wide range of sensors and actuators for data acquisition and control of outputs.

Installation

Mounting: Ensure the power for related equipment is cut after equipment installation, and verify that the alignment of a printed circuit board is consistent with the correct dimensions of a mounting bracket or assembly area. Use proper tools and work on an anti-static table, as the board is static-sensitive.

Troubleshooting

Not Power: To check whether the power supply circuit is in working condition, check if the power cable is properly installed, and whether the fuse on the board is blown. In the event that the fuse is blown, the fuse must be replaced with a new one of the same specification after the cause of the fuse blowout has been identified and eliminated.

Signal Transmission Failure: Check if the interface connectors have come loose or if they are corroded. If so, clean or substitute the connectors. Additionally, the signal transmission parameters configuration should be checked and ensure that they are compatible with the devices that are connected to the board.

Faulty Status/Fault LED: Check if the "Status" or "Fault" LED is in an abnormal state, then refer to the manual for explanation of corresponding fault code/indication meaning. This could be due to a hardware malfunction of the board itself or the connected external hardware. Reset the board or unplug and reconnect the external equipment, and see if it would help.

Application range

Power Generation Industry: In the power generation industry, GE IS200DSPXH1DBC is an advantageous interface module for the generator excitation control in power plants. It assists to keep the generator excitation current, stabilize the supply voltage and frequency of the generator, and maximizes the efficiency and reliability of power generation.

Manufacturing Industry:For controlling different automated devices on manufacturing production lines In robotic arms and conveyor belt systems, for example, it can control the movement and operation of the equipment accurately, improve production efficiency and product quality, and realize intelligent manufacturing.

Oil and Gas Industrym: In oil and gas exploration production process,GE IS200DSPXH1DBC can be used at oil pumps, gas compressors and other equipment control systems. There are used to monitor and control the running status of the equipment in real time, optimize the production process, provide safe and efficient operation of oil and gas production process.