GE IS200DSPXH2DBD

Operating Parameters

Operating Voltage: 24V DC

Rated Current: 10A

Input Signal Types: 0 - 10V, 4 - 20mA

Output signal types: 0 - 10V and/or (4 - 20mA) analog output signals

Communication Interfaces: Ethernet interface that transmits data at a rate of 10/100Mbps, RS485 with baud rates between 9600 - 115200bps

Operating temperature range: -20 °C to 70 ° C

Storage Temperature Range: -40°C to 85°C

Protection Level: IP20

Product Features

Fast Signal Processing: GE IS200DSPXH2DBD features a high-performance digital signal processing core that is able to process various complex signals quickly and accurately with high precision. It is capable of processing large volumes of data in real-time, thus providing fast and accurate control in industrial systems. Using high speed data acquisition systems as an example, it can accurately sample and analyze signals to ensure data quality and reliability.

Mutiple interface capabilities: like audio I/O interfaces and digital communication interfaces that support Ethernet and RS485. Analog interfaces are capable of networking with both sensors and actuators, allowing them to receive or transmit analog signals, bridging the gap between the gateway and its many industrial devices. Digital communication interfaces support a wide range of industrial communication protocols, such as Modbus, Profibus, etc., allowing for built-in integration into various industrial control networks.

reliable fault diagnosis and protection system: GE IS200DSPXH2DBD can continuously monitor its own operating state and that of the connected external devices. It will take the corresponding protective measures immediately, like turning off the output or passing sound signal, once abnormal situation, such as over voltage, over current or signal loss is found out, in order to protect the equipment to avoid damage and to guarantee high system as a whole the safety and stability.

Installation

Panel Mounting: Check the mounting location to the control panel, ensure the panel is and flat firm. Position GE IS200DSPXH2DBD's mounting holes so they match the panel holes, and fix the device to the panel with screws ensuring it is done with secure. Distributing evenly his screws tightened to avoid the deformation of the device or poor contact.

Troubleshooting

Communication Failure: In case GE IS200DSPXH2DBD fails to communicate with other devices, first check to see if the communication cable has been properly connected and whether it is damaged or torn. Next, review the device communication parameters such as baud rate, data bits, stop bits, and parity bits, to make sure they match those of the attached devices.

Abnormal Input Signal: Determine whether the input signal is unstable, incorrect, and requiring inspection] Check the source device and the sensor as the first step; the sensor is normal, check whether the output signal is within the allowable range. Next, examine whether the input cable receives interference or has bad grounding.

Output Error: If the output of GE IS200DSPXH2DBD cannot control the external device normally, or the output signal is not as expected, first check whether the output cable is correctly connected and whether the connection points are loose. Next, test if the external device is flawless and if it is a suppressed or short circuit.

Application range

Power Generation Industry: GE IS200DSPXH2DBD is extensively used in the control systems of generators and power plants. It can ensure accurate control of excitation system of generators, adjust internal-output voltage and frequency of generators, and keep stability and reliability of power supply. Besides, it can also be applied to dispatching and controlling system of the power grid for real-time monitor and control of the operating status of the power grid to guarantee the safe operation of the power grid.

Industrial automation: This device is extensively used to control and monitor various processes in industrial automation production lines. This could be for controlling the movement of robots, the functioning of conveyor systems, and even product quality checking. With precise control on operation of every device, it has the ability to increase production efficiency, product quality, and lower production costs.

Petrochemical: The petrochemical industry utilizes it to monitor critical parameters in the production process, including temperature, pressure and flow rate. It can achieve the automatic control of the production process, optimize the production process, and ensure the safety and stability of the production process. In the oil refining process, for example, it can be used to control distillation tower temperature and pressure to ensure product quality and yield.