GE IS200EPSMG1AEC

Operating Parameters

Input Voltage: 125VDC.

Output voltage: 5VDC, 15VDC, 24VDC, 70VDC.

Type of Components: Transformers, inductors, capacitors, transistors, resistors, integrated circuit, fuse.

Connector Quantity:2.

Types of resistor: Metal film resistors, Carbon composite resistors.

Output power: Sufficient enough to feed the power supply of corresponding modules.

Product Feature

Voltage Conversion: GE IS200EPSMG1AEC’s main function is to convert 125VDC voltage from the EPDM board to different voltages (5VDC, 15VDC, 24VDC and 70 VDC (isolated for contact wetting), which are the operating voltages required by the control system.

Voltage-Current Output for Automatic Control: The module provides a voltage-current output signal to the automatic control system, achieving optimal excitation control and thereby improving the stability of the generator.

Front Panel Indicator: Several LED lights are projected on the front panel through the LED lights to visually display the working status of the module, such as power-on status and operation status.

Installation

Connect the Module: GE IS200EPSMG1AEC should be inserted into the appropriate EPBP backplane slot; ensure that the module is aligned with the necessary pins for a successful connection.

Troubleshooting

No Output Voltage: Check for normal input voltage from the EPDM board. Check the Voltage to see if it is 125VDC at the input terminal of the module. Verify that the input voltage is normal and check the internal circuit of the module, such as fuses, transformers, etc.

Faulty LED Indications: If the LED lights on the front panel exhibit an abnormal status, refer to the manual to determine what the abnormal indication refers to. Well, GE IS200EPSMG1AEC can be due to issues like circuit flaws, part defects or wrong configurations.

Overheat: In case GE IS200EPSMG1AEC gets overheated, ensure that the environment is good for heat dissipation. Make sure is enough space around the module for the air to circulate. Ensure that the cooling fan is functioning properly. Also make sure there is no short circuit or over-current in the circuit causing the heat.

Power Supply Intermittency: Inspect if there is any loose contact at the power supply circuit's connection. Check the components in the power supply circuit, including capacitors and inductors, for performance degradation or damage, which can cause an unstable power supply.

Application range

Thermal Power Plants: Thermal power plants use it to provide power to the excitation system of steam turbine generators, maintaining stable generator operation and power quality.

Hydro-Power Plants: GE IS200EPSMG1AEC is also used in hydro-power plants for the excitation system of the hydro-generators, providing necessary power support to ensure the normal operation of the power generation equipment.

Wind Power Plants: Its use in a certain wind power generation system can supply power to the excitation systems of units in wind power plants, ensuring the stable operation of the wind power grid.

Industrial Power Systems: GE IS200EPSMG1AEC can provide power to the excitation systems of generators in industrial substations to ensure the stable operation of industrial power grids in large industrial power systems, such as metallurgical and chemical industries.