GE IS200EPSMG1AED

Operating Parameters

Input Voltage: 125VDC.

Power Supply: 65W@5VDC, 15VDC, 24VDCm.

Output Current: 5A.

Power Capacity: 200W.

Efficiency: 90%.

Operating temperature: -20℃ to 60℃.

STORAGE TEMPERATURE RANGE: — 40° C to + 85° C.

Humidity resistance: 5% – 95% RH.

Product Feature

Wide Control Compatibility: GE IS200EPSMG1AED Compatible with varieties of control systems and software. This means that users can easily incorporate the Orange Pi module into a range of existing setups, and can easily extend their existing setup without worrying about major compatibility issues.

High - Efficiency and Energy - Saving: Technology, high efficiency, low energy consumption. This allows it to do its power - conversion work with less energy usage - a need in a world where energy savings and environmental friendliness are becoming increasingly important.

External Power Supply: It can provide power for external modules It supplies power to modules like the crowbar module, EDCF, EGDM, and EDEX de - excitation modules with 24VDC. It also provides 70VDC for ECTB and EXTB modules.

Installation

Backplane Install: Initially, place GE IS200EPSMG1AED module into the respective EPBP - like backplane slot. Then insert the module carefully to make sure connection is secure. A good fit is needed for sound electrical and mechanical contact. Align the connectors on the module exactly with the interfaces of the backplane. These connections need to be secured closely to avoid causing any loosening, which may disrupt the signal or power flow.

Troubleshooting

No Output Voltage: First check whether the input voltage sent by the relevant board is normal. Step 1 - Check voltmeter at input terminal. Check the internal circuit of module. If the input voltage is 125VDC. - You should inspect certain components like transformers, fuses and check if they are damaged.

Output Voltage is Abnormal: First check the load connected to the output terminal if the output voltage is abnormal. There could be a short - circuit or load overload. Then, verify the voltage - regulation section of the module. Here transistors and ICE part of this circuit is failure.

RESOLUTION LED abnormal: If the LED lights on the front panel display an abnormal status, please refer to the module manual to check what is an abnormal indication. Another cause could be faults in the circuit or the failure in one or more components due to incorrect configurations.

Application range

Wind Power Plants: GE IS200EPSMG1AED is used to deliver power to excitation systems of wind - turbine generators in wind power generation systems. Due to the unpredictability of wind energy, GE IS200EPSMG1AED provides stable power to ensure the wind power network's stable operation and helps integrate the electricity produced by the wind into the full power grid.

metallurgical and chemical industries : using the module to supply electricity to industrial substation generator's excitation system. By doing so, it ensures the stabilization of the industrial power grid, which is integral to the uninterrupted functioning of industrial processes that require a must-have constant power supply.

Module Applications: GE IS200EPSMG1AED can be integrated into power grid systems. There, it serves to maintain a constant power to most grid - related apparatus, so as to improve the general stability and reliability of the power grid. This is particularly true in order to preserve the electrical supply integrity across varied regional and user segments.