Brand: GE Description: IS200ERIOH1AAA Condition: Brand New Certificate: COO TEST REPORT WARRANTY LETTER Warranty: 1 year Inventory Qty: 12 Payment Term: T/T Shipping Port: Shenzhen GE IS200ERIOH1AAA Used to extend I/O connectivity over standard Ethernet in distributed turbine-control architectures.
|
Manufacture |
GE |
|
Model Number |
IS200ERIOH1AAA |
|
Model Number |
IS200ERIOH1AAA |
|
Catalog |
Mark VI |
|
Description |
GE IS200ERIOH1AAA Exciter Main I/O Board |
|
Country Of Origin |
USA |
|
HS CODE |
8479909090 |
|
Dimension |
233 × 160 × 50 mm |
|
Weight |
0.4 kg |
Technical Parameters
Ethernet Ports:
2 × 10/100Base-TX RJ-45 (redundant pair)
I/O Backplane Interface:
Dual 50-pin connectors to I/O-pack carrier
Protocol Support:
GE IONet over UDP/TCP tunneling
IPv4 addressing; VLAN tagging (802.1Q) support
Performance:
Throughput: up to 100 Mbps per port
I/O Scan Latency: ≤ 2 ms typical
Memory & Processing:
64 MB SDRAM buffer for I/O caching
16 MB Flash for firmware/configuration storage
Power:
24 V DC via backplane (18–32 V DC), 0.5 A max
Environmental:
Operating Temp: –40 °C to +70 °C
Storage Temp: –55 °C to +100 °C
Humidity: up to 95 % RH, non-condensing
All specifications apply to GE IS200ERIOH1AAA
Product function
Acts as a gateway between GE's IONet I/O backplane and standard Ethernet networks. It encapsulates remote I/O data into Ethernet frames, manages address translation and packet buffering, and provides redundancy for critical control-loop I/O without requiring specialized fieldbus hardware. GE IS200ERIOH1AAA delivers these capabilities.
Core supporting modules
I/O Pack Carrier: IS42xPSCAH1B supplying backplane power and I/O-bus connections
Controller Module: Mark VIe CPU (e.g., IS200TPROH1C) managing remote I/O mapping and control logic
Remote I/O Racks: Field-mounted I/O packs (analog, discrete, safety) connected via standard Ethernet cabling
GE IS200ERIOH1AAA interfaces with these modules.
Extension components
DIN-Rail Adapter: Clip for mounting the ERIO module in non-VME instrument racks
Fiber-Ethernet Kit: SFP-to-fiber adapters for longer-distance uplinks
Redundancy Switch: External fail-over switch for Ethernet-path resilience
Terminal Blocks: Pluggable screw-clamp blocks for local sensor and actuator wiring
These extensions support GE IS200ERIOH1AAA
Software support
Configuration Tool: GE ToolboxST™ with Ethernet I/O Mapping Wizard for device-to-slot assignment
Diagnostics & Monitoring:
Port-link status and I/O-health flags in HMI and OPC-DA tags
Ethernet-error counters and buffer-overrun alerts viewable in controller diagnostics
Firmware Management: Upgrades via ToolboxST™ or web interface with CRC validation and rollback capability
Documentation: Detailed setup and installation procedures in the GE Mark VIe/VIeS Ethernet I/O Interface Manual
GE IS200ERIOH1AAA is fully covered by this support.
