GE IS200ISBEH1ABC

Operating Parameters

Operating Voltage: 24V DC.

Optical and electrical signal type: Input signal.

Type of Output Signal: Optical and electrical signals.

The Data Transmission Rate: 10Mbps

Operating temperature range: -20 °C to 60 °C.

Operating Temperature Range: -40°C to 85°C.

Product Feature

High-speed networking capability: GE IS200ISBEH1ABC can act as a high-speed communication interface between devices in a network. This allows the RoofMaster to rapidly and reliably send all sorts of data, like control commands and feedback signals, enabling effective communication and coordination between various components. In the application layer, data exchange can be realized in a high rate in a complicated industrial control network, thus effectively minimizing the transmission delay of data, and increasing the response speed of the whole system.

Strong Transition Function: GE IS200ISBEH1ABC can transition between various signal types. It converts optical input data to electrical data and configures it back to optical output signals. This allows devices up to the third level of the hierarchy that have different types of signals to connect to each other and control the complete system.

Robust Protection and Monitoring: Provides a series of protection and monitoring mechanisms. It features LED indicators indicating the current operation working state, including power supply state, data transmission state and interlock state. This enables operators to get a quick understanding of the operation status of the device, and it is able to identify the potential issues on time. Moreover, it may also come with voltage, current and short-circuit protection functions, which secure the device and the system working steadily and safely.

Installation

DIN Rail Installation: Verify the installation and fixing of the DIN rail. Next, match the device's mounting holes with the DIN rail and securely fasten it with suitable screws. Make sure to tighten the screws uniformly to avoid the device from shaking or becoming loose. Based on the size of the device, you should measure and drill an appropriate hole on the control panel. Slide the device through the hole from the front of the panel and secure it with nuts or clips from the back. However, ensure that the device is flat when installed, and there is no gap between it and the panel, as it may affect the performance of the device.

Troubleshooting

Communication Failure: GE IS200ISBEH1ABC In case of communication fault, first ensure whether the communication cable is properly connected or there is any damage or bad contact. Next, verify that the communication parameters of both the device and the connected device are configured correctly, such as the communication protocol and the settings of the communication interface. If there is a need, you can also restart the communication device or reset the communication parameters.

Signal Conversion Abnormality: If the signal conversion is not normal, you need to check if the input signal source is working and if the output signal of the signal source is within the normal range. Check the signal wire is not broken or short-circuited. If you have tried all these methods and your device still does not work properly, it may be a problem with the signal converting module of your device that has failed. Replace the module or send it for repair.

Application range

Power Generation Plants: GE IS200ISBEH1ABC is used in the control systems of turbines in power generation plants (gas-fired power plants, steam power plants, etc.). Its function is to monitor the operation status of turbines directly, such as speed, temperature and pressure, and transmit related data to the central control system for analysis and processing, so as to ensure the safe and efficient operation of power generation equipment.

Indirect Transmission Systems: GE IS200ISBEH1ABC has a wide range of applications in industrial automation machinery production lines. For example, in the automotive manufacturing industry, it can be used to control the operation of the robotic arm, conveyor belt and other equipment, realize the precise control and coordination of the production process. It can be applied in the food and beverage sector for monitoring and controlling the filling, packaging, etc., to enhance production efficiency and quality of products.

Petrochemical: In petrochemical industry, GE IS200ISBEH1ABC is an important part of control systems for oil refining equipment and chemical reaction devices. It can adjust process parameters such as temperature, pressure and flow rate in real time, and send control commands to related equipment to ensure the stability and safety of the production process and prevent accidents.