GE IS200TBAOH1CCB

Operating Parameters

Input Voltage: 24V DC ±10%.

Recent Posts Output Rail: 5V DC, 12V DC.

Input Current: Maximum 5A.

Output max: 5V output - 2A; 12V output - 1A.

Interfacing: Ethernet, RS485.

Data Storage Capacity: 1GB.

Operating Temperature: -20°C ~ 70°C.

Product Feature

High-Precision Signal Conversion: Does not work on signal conversion technology, including multi-pole filter and high-precision architecture circuit or logic signal conversion between voltage-current. It has a very wide range of accurate conversion for voltage and current signals for analog signals, and its conversion accuracy error is less than 0.1%. GE IS200TBAOH1CCB is also used for digital signals, as it can quickly and accurately convert data codes to meet the needs of different systems for signal reception and processing.

Data Storing And Transmission: With an internal high-speed and large-capacity data storage module, this device can temporarily store a great deal of data. This capacity to store data is achievable at the approximate rate of about 10MB/s, and can range anywhere between 32KB/s to 1GB. GE IS200TBAOH1CCB supports multiple high-speed communication interfaces, such as Ethernet and Fiber Optic. The transmission rate up to 1000Mbps, the bit error rate is less than 10^-9.

Very strong self-diagnostic function: GE IS200TBAOH1CCB can carry out monitoring of its own operating state continuously, using a complete self-diagnostic function. It is able to monitor real time parameters such as power supply voltage, temperature and fan operation. It can promptly issue an alarm signal and record fault information when abnormal conditions are detected. The self-diagnostic function can dig out more than 90% of fault information within 1 second, and quickly find the fault point for the maintenance personnel to troubleshoot.

Installation

DIN RAIL MOUNTING: Initially, confirm that the DIN rail is stable and secured inside the control cabinet. This allows you to slide the device onto the rail until you hear it click securely into place. Finally, use the locking mechanism on the device to clamp it onto the DIN rail and avoid slip or vibration.A hole should be measured and cut on the control panel as per the size of the device. Insert GE IS200TBAOH1CCB into the hole in the front of the front panel and then use some nuts or clips in the back of the panel to fix the device. 3. Ensure the device is installed flat and flush with the panel and all connections are made correctly.

Troubleshooting

Power Supply Problem: Consider checking the power supply cable connection and whether there is voltage at the power supply input terminal if the device does not turn on. If the power supply cable is fine, check if there is any fuse in the device that is blown. Replace the fuse with a fuse of the same specification if the fuse is blown. If necessary, send it to a professional for repair, the device itself is internal power supply circuit failure.

Communication Failure: In case of communication problem, confirm the connections of the communication cable properly, damaged and contact problem or not. Next, verify that the communication parameters on the device match those of the connected equipment, such as protocol, baud rate, and data format. If needed, restart the communication tool or modify the communication settings.

Output Abnormality: If the input or output signal is abnormal, first check the signal source, whether the signal source works well, and whether the signal source output level range is normal. Check to see if the signal cable is broken, short-circuited or disturbed. If after checking the signal source and cable it is still not working, then there is an issue in the signal processing circuit of the device. For this, it is advised to measure the attorney circuit part and replace the circuit components, if possible, if the components are defective.

Application range

Power Generation Industry: GE IS200TBAOH1CCB can be used in the turbines and generators control system of thermal power plants. It detects and adjusts factors like the temperature, pressure, and rotational speed of the turbines, and the voltage, current and power of the generators. It is used in hydro-power plants to monitor and control hydro-turbine governors and the generator transient excitation systems, so that the hydro-power unit and the quality of power generation are kept stable.

Industry :  they are used in oil refineries as part of the control system of oil refining equipment to measure and control temperature, pressure, flow, and other parameters of various processes including distillation, cracking, and reforming. It working in chemical plants for the chemical reaction process control; to ensure the safety and efficiency of chemical reaction by accurate control of parameters such as raw material feeding, reaction temperature, and pressure.

Metallurgical Industry: GE IS200TBAOH1CCB is used in the control of blast furnaces and steel-making equipment in steel mills; Data from the blast furnace includes temperature, pressure, and material level readings, while the steel rolling side includes speed, temperature, and tension settings. For example, in aluminum smelters, it is used in the control system of electrolytic aluminum equipment to monitor and control parameters of the electrolytic cell such as voltage, current, and temperature. It can also improve production efficiency and product quality.