Brand: GE Description: SERVO TERMINATION BOARD Condition: Brand New Certificate: COO TEST REPORT WARRANTY LETTER Warranty: 1 year Inventory Qty: 17 Payment Term: T/T Shipping Port: ShenZhen GE IS200TSVOH1BBB is a servo input/output terminal board designed specifically for the Mark VI turbine control system. It interfaces with two electro hydraulic servovalves to provide precise control and feedback monitoring via a linear variable differential transformer.
|
Manufacture |
GE |
|
Model Number |
IS200TSVOH1BBB |
|
Ordering Number |
IS200TSVOH1BBB |
|
Catalog |
Mark VI |
|
Country Of Origin |
USA |
|
HS CODE |
8479909090 |
|
Dimension |
11.5cm*4.5cm*3.8cm |
|
Packing Dimension |
14cm*7cm*6cm |
|
Weight |
0.22kg |
Operational Parameters
Input Voltage: 24 VDC
Current Consumption: 120 mA
Analog Signals: 0 to ±50 VDC
AC Signals: Up to 24 VAC
Current Loop Signals: 4 to 20 mA
Feedback Support:Accommodates up to three Linear Variable Differential Transformers (LVDTs) per channel, allowing for high, median, or low select configurations.
Pulse Rate Inputs: 2 to 14 kHz
Product Features
Power Supply Function: Circuit Board The main role of the GE IS200TSVOH1BBB is to serve as a power supply board. it provides power to individual components. This allows microcontrollers, communication modules, and input/output interfaces to work properly by providing them with the required electrical energy.
Signal Interface Function: Measurements of signal are provided via the four TP test points. These points allow technicians to monitor the integrity of signals moving through the system. This is necessary for system performance diagnostics.
Connection Function: The board facilitates Ethernet connectivity with a jack connector. This connection enables the board to connect and communicate with other Mark VI, Mark VIe, or EX2100, and maintenance and operator stations. GE IS200TSVOH1BBB facilitates data exchange, for example, real time operational data.
Installation
Power off the System: Prior to installation, confirm the Mark VI system and all related power sources and connected equipment is powered off, to minimize electrical shock potential and damage to added components.
Locate the Installation Slot: You will be guided on how to install the GE IS200TSVOH1BBB in the Versa Module Europa rack. The board has an industry-standard profile as a mechanical and electrical interface.
Install the board: Align the board with the slot, and gently insert it into place. Ensure that the connectors on all the pins of the board's edge are properly inserted into the slot.Secure the Board Make sure to tighten it.This stops the board from getting loose and rattling around while in use.
Connect Cables: According to the system wiring diagram, connect any power cables, signal cables, and the ethernet cable. Check all connections are crab-claws, to avoid intermittent connections.
Power ON and Test:Once installations and cable connections are done, switch ON the system. Use the GE IS200TSVOH1BBB front - panel status LEDs to assist in checking operation of the GE IS200TSVOH1BBB and other components.
Application range
Gas Turbine Control: Testing and calibration of sensors and actuators, or interfaces with the turbine field instruments, to monitor and control turbine operations.
Industrial Automation: Used in PLC based systems for monitoring and controlling processes.
Oil & Gas: Effective signaling for upstream as well as downstream operations.
Troubleshooting
Visual Inspection: Look for any physical damage, loose wires, or burnt components on the board.
Signal Checks: Use proper testing equipment to confirm that the input and output signals are in nominal range.
Jumper Settings: Ensure jumpers JP1 to JP6 are properly set according to the application.
Cable Connection: Properly connect all cables, especially at J5, J3, and J4 connectors and examine for corrosion.
Feedback Accuracy: Validate the readings from LVDTs to ensure accurate valve position feedback.
