Brand: GE Description: Digital Rail Card Assembly Condition: Brand New Certificate: COO TEST REPORT WARRANTY LETTER Warranty: 1 year Inventory Qty: 7 Payment Term: T/T Shipping Port: ShenZhen GE IS210DTAIH1A is a simplex analog input/output terminal board used in the Mark VI Speedtronic turbine control system. It is designed to process analog signals, converting field device signals into digital data for the control system.
|
Manufacture |
GE |
|
Model Number |
IS210DTAIH1A |
|
Ordering Number |
IS210DTAIH1A |
|
Catalog |
Mark VI |
|
Country Of Origin |
USA |
|
HS CODE |
8479909090 |
|
Dimension |
30cm*18cm*10cm |
|
Packing Dimension |
32cm*20cm*12cm |
|
Weight |
1.2kg |
Operating Parameters
Operating voltage range: 20 VDC to 30 VDC
Power consumption:Approximate 5W, depending on configuration and load connected to module.
Digital I/O: The module supports both pulse input and digital output signals and used to control external devices (relays, actuators, alarms).
Input Voltage Range:24 VDC.
In Output Types– digital outputs are generally dry contacts (can switch 24V)– they can be used so that the module also controls external equipment.
Product Features
Ruggedized: Designed to endure the rigors of nasty industrial surroundings, such as vibration, temperature variations, or electromagnetic interference.
Modular Design: Makes swapping out and upgrading components quick, minimizing downtime.
Advanced Diagnostics: Built-in diagnostic capabilities for real-time monitoring and fault identification.
Compatible: GE IS210DTAIH1A Integrates harmoniously with additional Mark VI series components and GE control systems.
Scalability: Can be expanded with more I/O modules or communication interfaces
Analog Signal Processing: GE IS210DTAIH1A also specifically handles analog signals coming from field devices and turns them into digital information for the control system.
Signal Conditioning: GE IS210DTAIH1A has noise suppression features on the module itself.
Transmit Processed Data: GE IS210DTAIH1A transmits processed data to the control system for real-time monitoring and control.
Installation
Pre-Installation Checks: Before installation, ensure that the power supply is turned off. Check if GE IS210DTAIH1A works with the actual control system. Examine the module for any apparent physical issues.
Mounting: Install the module in a DIN rail or mounting panel in the control cabinet. Make sure not to have the fans too close together so that they overheat.
Wiring: Refer wiring diagram in manual and connect cables for input/output. Keep cables as short as possible and use shielded cables to reduce electromagnetic interference. Make sure all connections are nice and tight so as to eliminate any loose wiring.
Power Up: Connect power to the module and validate that it initializes properly. Check communication with the control system.
Install: the installed module configuration module config module config. Before full operation, test the module function.
Application range
Power Generation: Turbine control, generator monitoring, and grid synchronization.
Oil and Gas: Pipeline monitoring/compressor control/safety systems.
Manufacturing: Process automation, machine control and quality assurance
Transportation: Rail and marine propulsion systems.
Renewable Energy: Wind turbine control and solar power management.
Troubleshooting
No Power: Inspect the power supply connections and voltage levels. Check fuses or circuit breakers.
ORIGINAL Communicating Failure: Verify cable connections and proper termination. Look out for IP conflicts or protocol mismatches. Reboot the module as well as the connected devices.
Overheating: and sufficient cooling. Lower the surrounding temperature as required.
Module Not Recognized: Double check configuration options. Update firmware if required. Replace the module if you suspect hardware failure.
Intermittent Functionality: Check for loose wiring or frayed cables. Make sure vibration or EMI is not an issue.
