GE IS220PPROH1A

Operating Parameters

Nominal supply voltage: 24 VDC (direct current)

Operating voltage range: 20 VDC to 30 VDC

Power consumption: 5W, depending on the configuration and connected devices.

Input voltage range: 0 to 24 VDC digital signal.

Output type: The IS220PPROH1A has digital output channels, which are typically used to control actuators, relays, or alarms based on the condition of the turbine.

Output voltage: The digital outputs are designed for 0 to 24 VDC operation.

Output current: The module can drive external devices with 24 VDC and can handle small loads

Output load: The module can handle output loads up to 500 ohms, suitable for low-power devices such as relays.

Product Features

Independent Overspeed Protection: The GE IS220PPROH1A has a separate channel that tracks the turbine's speed, enabling instant reaction if overspeeding occurs.

Watchdog Functionality: GE IS220PPROH1A acts as a watchdog for the main control system, providing another level of safety and reliability to turbine operations.

Monitoring: The module allows for real-time monitoring and control of devices by collecting and processing data from various sensors.

Ingress protection (IP) rating: IP20 It needs to be put into a proper enclosure or a control panel to protect it from the environment.

Circuit Protection: The GE IS220PPROH1A protects sensitive input and output devices from excessive current or voltage which can cause damage.

Overvoltage Protection: Industrial environment has transient voltage spike which the module can withstand due to over-voltage protection.

Overcurrent Protection: Overcurrent protection is incorporated to safeguard both the module and the enclosure of the connected device from potential damage due to overcurrent conditions.

Interface / Protocol: The GE IS220PPROH1A utilizes the Load/IP communication protocol, enabling it to work seamlessly with other devices in the Mark VIe control system.

Bus Communication: Enables real-time data transfer and communication with the central processor of the control system and the other modules in the network.

Vibration Resistance: Up to 1G vibration sustained, adapted to moderate vibrating industrial environments.

Resolution: High precision pulse inputs and outputs for precise turbine conditions control and monitoring

Installation

Mounting: Place the module in a proper enclosure or control panel that meets the environmental specifications of the operating location.

Connections: GE IS220PPROH1A involves connecting the module to the respective field devices of the turbine, all wiring should be done as per the requirements.

Testing: Once installed, testing is performed to ensure the functionality of the module and to check if it integrates with the control system.

Application range

used: mainly gas, steam, and wind turbine control and management systems, especially in safety remains applications, should have high reliability. GE IS220PPROH1A works well in power generation, oil and gas, and manufacturing.

Troubleshooting:

Diagnostic LEDs: Look at the diagnostic LEDs on the module for indications of faults or errors.

Check System Logs: Check the system logs for any error messages or warnings related to the module.

Connections: Check all wiring to ensure it is connected properly and securely.