Brand: GE Description: Analog Output Module Condition: Brand New Certificate: COO TEST REPORT WARRANTY LETTER Warranty: 1 year Inventory Qty: 5 Payment Term: T/T Shipping Port: ShenZhen GE IS230SNAOH2A is an advanced analog input/output module designed for industrial automation systems. It features precise signal processing, efficient power management, and RS-485 communication support, making it an ideal choice for complex control applications.
|
Manufacture |
GE |
|
Model Number |
IS230SNAOH2A |
|
Ordering Number |
IS230SNAOH2A |
|
Catalog |
Mark VIe |
|
Country Of Origin |
USA |
|
HS CODE |
7326909000 |
|
Dimension |
16.7cm*14.8cm*5.5cm |
|
Packing Dimension |
19cm*17cm*8cm |
|
Weight |
0.56kg |
Operation Parameters
Input Voltage: 24V DC
Frequency Range: 40-60 Hz
Power Handling Capacity: 1.0 Amps
Communication Interface: RS-485
Input Type: Digital
Output Type: Analog
Environmental Rating: IP20
Operating Temperature: -10°C to +50°C
Storage Temperature: -20°C to +70°C
Product Features
Signal conditioning: The GE IS230SNAOH2A does some signal conditioning before it outputs the analog signals. This is to eliminate any electrical noise or unwanted fluctuations of the input data.
Analog Signal Output: The GE IS230SNAOH2A outputs accurate analog signals for controlling field devices, including valves, actuators, and drives.
Signal Conditioning: GE IS230SNAOH2A Offers signal conditioning to guarantee precise and stable output signals.
Redundancy Support: It can be configured within redundancy systems for high-availability applications.
Compatibility: Compatible with the Mark VIe control system and other components.
Installation
Mounting: GE IS230SNAOH2A is normally mounted in a control cabinet on a DIN rail. Also make sure that there is space between boxes for ventilation and access.
Installation Cables: Use shielded cables to connect the module to the control system and field devices.
Power: Make sure that the module is powered with 24V DC. And on the other side of things, be sure the polarity matches or you could fry your receiver.
Inadequate grounding: For electrical systems, ensure that the module and any associated equipment are properly grounded to minimize electrical noise and ensure safety.
Application range
Electricity Generation:GE IS230SNAOH2A in Gas turbines, steam turbines, and hydroelectric plants.
Telecommunication: Network traffic analysis, stable connections, and service quality.
Industrial Automation: Manufacturing, process control and material handling.
Renewable Energy: Wind turbine controller solar power system.
Troubleshooting
No Output Signal: Check the power supply connections, make sure 24V DC is present. Check the output wiring and field devices connection.
Output Signal Check:Check error in configuration parameters with software. Examine the terminals for looseness or corrosion.
Communication Failure:Inspect Ethernet cables and connectors. Check that the IP address and network settings are properly set.
Module Not Detected:Re-seat module into slot. Software Firmware Update.
Overheating:Provide enough ventilation around the module.
Diagnostic Alarms:Utilize the diagnostic capabilities in ToolboxST to diagnose the individual fault codes and assist with correction.
