Brand: GE Description: SRLY Terminal Board Condition: Brand New Certificate: COO TEST REPORT WARRANTY LETTER Warranty: 1 year Inventory Qty: 5 Payment Term: T/T Shipping Port: ShenZhen GE IS400SRLYS2ABB is a simplex terminal block used in the Mark VIe Distributed Turbine Control System. It provides 12 channels for connecting and terminating wires. It plays a vital role in maintaining signal integrity and simplifying wiring.
|
Manufacture |
GE |
|
Model Number |
IS400SRLYS2ABB |
|
Ordering Number |
IS400SRLYS2ABB |
|
Catalog |
Mark VIeS |
|
Country Of Origin |
USA |
|
HS CODE |
8479909090 |
|
Dimension |
30cm*25cm*10cm |
|
Packing Dimension |
32cm*27cm*12cm |
|
Weight |
1.5kg |
Operational Parameters
Common Mode Voltage Range: 5 V DC
Maximum Lead Resistance: 15Ω
Analog Output Current: 0-20 mA
Operating Temperature: -30°C to 65°C
Frequency: 50 or 60 Hz
Humidity: 5% to 95%
Number of Channels: 12 channels, enabling multiple connections for various devices
Product Features
Relay Switching Function: The GE IS400SRLYS2ABB is designed to switch electrical circuits ON and OFF. It includes several relays, which can be individually controlled by input signals. The relay contacts open or close when an appropriate signal is received, thereby allowing or interrupting the flow of current to the load connected in series.
Input Signal Compatibility: The GE IS400SRLYS2ABB supports most regular input signals. It can accept input signals from a programmable logic controller, sensors or another device in the control sequence. It can control the state of the relays And be part of complex automation systems, utilizing the input signals.
Isolation Function: The GE IS400SRLYS2ABB allows electrical isolation of the relay between the input and output circuits. With this isolation, the control system is protected from any electrical interference or voltage spikes in the load circuit. It also improves the safety of the system by stopping electrical faults which can cross the various circuits.
Diagnostic and Monitoring: The GE IS400SRLYS2ABB include the Diagnostic and Monitoring. These characteristics can identify faults such as relay contact failure, over - current fault, or abnormal temperature rise. Most of this diagnostic information can be used to perform proactive maintenance and troubleshooting, cutting down on system downtime.
Signal Termination: Provides a single point for wire connections and termination for the ease of system wiring and maintenance.
Signal Integrity: is kept high through a low lead resistance and the appropriate voltages ranges
Environmental Stability: Functioning in extreme temperature ranges and humidity.
Installation
Before you proceed: power down the system, for electric hazards.
Installation: Insert the GE IS400SRLYS2ABB terminal board into the appropriate slot in the Mark VIe control system rack
Connection: Connect the wiring to terminal board.
Environmental Resilience: After installation, enable the system and run diagnostics to test for proper service.
Application range
Power Generation: Operation and control of turbines in power plants.
Industrial Automation: Managing sophisticated machinery and processes in manufacturing plants.
Energy Industry: Making oil and gas plants run efficiently, like turbine-driven compressors and oil and gas pumps.
Troubleshooting
Routine Checks: Monitor the terminal board for wear and tear, damage, or loosening connections.
Environmental Controls: Operating Environment should not exceed the specified temperature and humidity limits to avoid overheating or condensation.
Connection Check: Make sure all electrical connections are tight and within the rated voltage and current.
