Vibration AS-022

Technical Parameter

Sensitivity: The device has a sensitivity of 100 mV/g±5%, thus giving an accurate and reliable method of measuring vibration acceleration.

Frequency Range:  1.5 Hz.

Temperature Range: The operating temperature range of Vibration AS-022 is -50 °C-125 °C and the storage temperature is -50 °C to +150 °C, allowing the device to operate reliably even under harsh environmental conditions.

Overload Capacity: Continuous overload capacity of 500 g, with the device being able to withstand shocks of up to 5000 g in all directions; thus it possesses durability and resistance to extreme forces.

Output Impedance: ≤5Ω,

Open Circuit Potential: -12 V±2 V within the operating temperature range is required to ensure stable and consistent output signals.

Features

Integrated Charge Amplifier: Vibration AS-022 contains an integrated charge amplifier that raises the output signal to a level usable directly, and there is no need for any external amplifier. Thus, the measurement setup becomes simple.

Real-time Monitoring: Vibration AS-022 makes it possible to monitor vibration acceleration in real time, allowing for the early detection of abnormal vibrations or any changes occurring in the equipment's normal operating conditions.

Signal Conditioning and Filtering: The sensor provides signal conditioning and filtering capabilities that remove noise and interference to yield clean and accurate measurement data.

Data Analysis and Diagnostics: Vibration AS-022 can perform a deep data analysis and diagnostics together with data analysis software or monitoring systems that help identify possible failure and provide predictions for need of maintenance.

Alarm Function: Alarm function can be set to activate whenever the measured vibration exceeds some predetermined value, providing an early alert to potential equipment failure.

Application Fields

Power Generation: Vibration AS-022 in power plants is used for monitoring turbine, generator, and other rotating machinery vibration, thus preemptively avoiding great failures and ensuring safe and reliable power generation equipment operation. Possibly, this can allow the detection of early signs of wear or imbalance for the maintenance personnel by continuously monitoring the vibration levels so that any unwarranted outages can be prevented.

Manufacturing: Vibration AS-022 will be suitable for monitoring vibration of the production equipment, such as machine tools, conveyor belts, and pumps. This helps manufacturers to realize operational efficiency, produce consistent products, and reduce production costs owing to minimum overhead on machine downtime and repair.

Petrochemical: Vibration AS-022 can be used in petrochemical industries for measuring vibrations on pumps, compressors, and other critical apparatus installed in refineries and chemical plants. It enables operators to act early in case of defective vibrations that could result in leaks, explosions, and other dangerous hazards, thus facilitating safe and effective operations.

Aerospace: This sensor is very important in the aerospace industry, where it helps to monitor the various vibrations of aircraft engines, landing gear, and other components. Very accurate and reliable in its working, it contributes significantly to ensuring the flight safety and performance of an aircraft. Because of its accurate analysis, it allows for timely maintenance upon detection of abnormalities, thus preventing any in-flight catastrophic failures.

Automotive: Vibration AS-022 accordingly allows vibration testing and evaluation of motor vehicles, components, and subsystems during the design and development process. It can also participate in a vehicle health monitoring system where potential problems are detected and give early warning to drivers to stop further accidents, hence ensuring more safety and reliability.