GE IS200GGXIG1AFE

Power Supply Voltage: 24V.

The Mother Natural Circuit states that Things will happen when the best data transmission rate is 100Mbps.

Output Signal Range: 0V to 5V.

Total temperature range -40°C +85°C.

Operating Temperature Range: -55°C to 125°C.

Protection Level: IP40.

Product Features

High-speed Data Transmission: With advanced data transmission technology, the IS200GGXIG1AFE delivers high-speed and efficient data communication. It is the communication protocol that effectively transmits control signals and feedback data in an efficient manner between various devices in the industrial control system, indicating that the whole system is working in conjunction smoothly. In a complex power generation control system, it can realize the high-speed transmission of generator real-time operation data to the control center, so that operators can adjust the operation status of the generator in a timely manner.

Stable and High-Quality Signal: GE IS200GGXIG1AFE adopts a reliable optical fiber interface, which enables stable and high-quality signal transmission. Optical fiber interface has strong anti-interference ability, which can effectively avoid the interference of electromagnetic signals in the industrial environment, and improve the accuracy and stability of the signal.

Strong Diagnose Function: GE IS200GGXIG1AFE has the automatic diagnose function that can always detect its working status. It monitors the system in real time and can detect faults such as signal loss, interface failure, etc., and send alarm signals. This enables maintenance staff to swiftly identify and resolve issues while minimizing system outages and increasing the reliability and availability of the entire control system.

Installation

Detach the Old Module: If there is an existing module, carefully detach it from the device without damaging other components. In addition, examine GE IS200GGXIG1AFE module for anomalies, ensuring the absence of any physical damage. The installation location must be selected in the control cabinet, with good heat dissipation and easy wiring and maintenance. Do not set it too close to powerful electromagnetic sources; you may have signal interference.

Troubleshooting

Screen Issue: Measures: Check whether the power supply is normal, whether the power indicator on the module is lit. When the power supply is normal, you should check the connection of the optical fiber cable and other signal cables to see whether it is disconnected or contact is poor. Then verify the configuration settings of the module to see that the output signal settings have been configured correctly.

Signal Interference: If there's interference with the signal, whether the module is installed near strong electromagnetic sources. If that is the case, look at relocating the module to avoid electromagnetic interference. You can also see if the signal cables are well grounded and if the shielding layer is damaged. Replace the shielded cables if needed.

Battery Module Overheating: When the battery module becomes extremely hot, check whether the ventilation of the control cabinet is good. Note that adequate space must be left around the module to allow heat to dissipate. For the control cabinet ventilation is poor, you can use cooling fan or improve ventilation design. Lastly, ensure that the module is not overloaded. This can lead to excessive heating if the module is running under heavy load for a longer duration of time. If so, the system configuration might need to be optimized or additional modules might need to be added to share the load.

Application range

Thermal power generation field: GE IS200GGXIG1AFE served as the communication interface for control signals and data transmission between a turbine control system and generator monitoring system, providing stability for the operation of the thermal power unit. It can also be applied in hydro-power plants, in which it plays an important part in the control system of the water turbine generator set, achieving the precise control of the water turbine and monitoring the working state of the generator.

Steel Industry: GE IS200GGXIG1AFE is mainly used in the control system of steel rolling production line of steel mills. It can timely transmit speed, pressure and other data of rolling mill equipment, and realize what coordinated control of each unit in production line ensures the quality and efficiency of producing steel. Used in the blast furnace monitoring system, and transmit blast furnace temperature, pressure and other key data to the control center for real-time monitoring and adjustment.

Petrochemical Industry: GE IS200GGXIG1AFE can be deployed in the control system of a petrochemical plant, including oil refining and chemical production processes. It can send process parameters like temperature, pressure and flow rate in the pipeline to the control room, thus achieving automatic control and monitoring of production process. It is also applied in the control of oil and gas storage and transportation equipment to precisely controlling the oil and gas storage and transportation equipment and keep its continuous and stable operation.