Brand: GE Description: Relay Output Module Condition: Brand New Certificate: COO TEST REPORT WARRANTY LETTER Warranty: 1 year Inventory Qty: 5 Payment Term: T/T Shipping Port: Shenzhen The GE IS410TRLYS1B is a relay output module designed by General Electric (GE) for the Mark VIe series industrial control systems. It controls external devices through relay contacts and supports multiple redundancy and diagnostic functions.
Manufacture |
General Electric |
Model Number |
IS410TRLYS1B |
Catalog |
Mark VIe |
Country Of Origin |
USA |
HS CODE |
9031809090 |
Dimension |
16*9*7CM |
Packing Dimension |
20*11*9CM |
Weight |
1.5kg |
Technical parameters
Working voltage: 650V DC (main circuit input), 24V DC (control power supply).
Output capacity: supports simplex relay contact output, 48 sub-channels, and each channel provides 3 output forms.
Contact type: supports wetting voltage detection, fuse open circuit detection and terminal board error check.
Protection level: meets industrial IP20 standards.
Working temperature: -40°C to +85°C.
Communication interface: supports Modbus RTU/TCP, EtherNet/IP protocols, and data transmission rate is 100Mbps.
Functional features
Redundant control: GE IS410TRLYS1B adopts a triple modular redundancy (TMR) architecture, with a master-slave switching time of ≤50ms, ensuring continuous operation of the system in the event of a single point failure.
Signal output: GE IS410TRLYS1B drives actuators (such as valves and motors) through relay contacts, supporting a maximum output current of 2645A (instantaneous).
Intelligent diagnosis: Real-time monitoring of contact status, fuse health and network communication anomalies, triggering alarms or isolating fault channels.
Working principle
GE IS410TRLYS1B is integrated into the Mark VIe control rack through the backplane connector. After receiving the controller command, the internal logic circuit drives the relay contact to operate, and the contact status is fed back to the control system through the sensor to form a closed-loop control.