HIMA F7133

Technical Parameters

Input Voltage: 110-240V AC

Output Voltage: 24V DC.

Maximum Output Current: 10A.

Power consumption:  < 5W.

Voltage monitoring range: 18~30V DC.

Current monitoring range: O-IOA.

Battery voltage monitoring range: 20-28V DC,

Operating temperature: -10℃ to 60℃.

Switching time: about 100ms (relay).

Protection level: IP 20.

Installation mode: DIN rail installation.

Number of channels:  4 independent distribution channels.

Fuse: equipped with 4 micro fuses; each fuse is equipped with LED indicator lights used to protect the circuit from faults such as overload and short circuit and which provide real-time status display.

Relay contact load capacity: 30V/4A (continuous load), residual voltage 0V.

Features

Accurate status monitoring and diagnostic function: Hima F7133 can accurately monitor its own operating status, the operating status of each circuit component inside the module is accurately monitored in terms of basic parameters such as voltage,current and temperature. Hima F7133 processes the monitored data through the internal diagnostic system, detects potential fault hazards in a timely manner, and issues early warning signals. For example, if the performance of a capacitor is constantly declining or is really abnormal in operation, the diagnostic system can issue warning signals to the operator in due time for the initiation of action before failure takes place.

Regulation of accurate power supplies optimizes operation: The Hima F7133, with its voltage and current steady control mechanisms, optimizes settings for supply of power to different classes of industrial equipment that enable them to operate under their optimal working conditions. This not only enhances production but also extends operational life. The precision electronic devices used in electronics manufacturing industries require an extremely high power quality. Hima F7133 can provide very clean and constant pure power and minimize the defective rate of your finished goods due to inconsistent power, thus increasing the production qualification rate of your plant and the economy of the enterprise and giving extra edge when fighting on that competitive edge.

Application

The Solar power generation: In the solar power generation process, Hima F7133 can supply power to the monitoring, inverter control and data acquisition systems of the solar power plant. It can adapt to different working conditions and voltage fluctuations of solar power generation systems, and ensure stable operation of the system and data communications, thus achieving efficient monitoring and management of the solar power generation process.

The Wind Power Generation: Likewise other systems in the wind farm including the wind turbine controls, the inverter controller, and the monitoring systems-demand that Hima F7133 be used to supply a guaranteed power supply. Hima F7133 can provide stable power to these devices; ensure technically safe and stable operation of the wind powered generation system, and improve the efficiency of wind power generation and power quality.

Aerospace Effect Aircraft Manufacturing: Hima F7133 can provide distribution for all the automated equipment, test equipment, tools, etc., placed in the aircraft assembly lines. It becomes essential to ensure the efficiency and quality in the making of aircraft. For example, Hima F7133 provides stable power to aircraft structural parts processing equipment, electrical system testing equipment, avionics equipment installation tools, etc. It meets the aerospace standards regarding high reliability and safety thus it can meet the strict requirements of aircraft making with regards to a power supply.

Airport Facilities: Hima F7133 can provide stable power for various equipment, like boarding bridges, baggage handling systems, runway lighting systems, navigation equipment, etc. At airports, in terminals, runways, navigation facilities, and elsewhere it can work stably, assuring the normal operation of airport facilities, and improving the performance and safety of the airport.