Brand: Vibro-Meter Description: CPU Card Condition: Brand New Certificate: COO TEST REPORT WARRANTY LETTER Warranty: 1 year Inventory Qty: 1 Payment Term: T/T Shipping Port: Xiamen The vibro-meter VM600 CPUMMk2 rack-based monitoring system is the evolution of Parker Meggitt's solutionfor the protection and monitoring of rotating machinery used in the power generation and oil & gas industries. VM600Mk2 solutions are recommended when a centralised monitoring system with a mediumto large number of measurement points (channels) is required.
Brand: Vibro-Meter Description: Modular CPU Card Condition: Brand New Certificate: COO TEST REPORT WARRANTY LETTER Warranty: 1 year Inventory Qty: 4 Payment Term: T/T Shipping Port: Xiamen CPUM 200-595-064-114 is the core control and communication component of VM600 rack-mounted machinery protection system (MPS) and condition monitoring system (CMS), with the functions of rack management, data gateway, multi-protocol communication, etc. It is designed for the monitoring scenarios of medium and large-sized rotating machinery.
Brand: Vibro-Meter Description:Signal conditioner Condition: New Warranty: 1 year Inventory Qty: 1 Payment term: T/T Shipping Port: Xiamen The VIBRO IPC704 signal conditioner converts the chargebased signal from a piezoelectric-based transducer into a current or a voltage signal. This current or voltage signal is transmitted to the processing electronics via a standard 2-wire or 3-wire transmission cable.
Brand: Vibro-Meter Description:Proximity Transducer Condition: New Warranty: 1 year Inventory Qty: 1 Payment term: T/T Shipping Port: Xiamen This product is a non-contact eddy current displacement sensor from the Vibro-Meter TQ 402 series. Operating on the principle of eddy currents, TQ402 111-402-000-012 A1-B1-C042-D000-E010-F0-G000-H10 is specifically designed for the precise measurement of parameters such as relative vibration, axial displacement, and eccentricity of rotating machinery shafts.
Brand: Vibro-Meter Description: rear panel Condition：New Certificate：COO TEST REPORT WARRANTY LETTER Warranty:1 year Inventory Qty:10 Payment term:T/T Shipping Port:Xiamen The Parker Meggitt 200-582-911-NHh is a dedicated rear panel for the VM600Mk2/VM600 mechanical protection and condition monitoring system which is used to provide an external AC power input connection for the RPS6U power module installed at the front of the rack.
Brand: Vibro-Meter Description: Piezoelectric Accelerometer Condition: Brand New Certificate: TEST REPORT WARRANTY LETTER Warranty: 1 year Inventory Qty: 2 Payment Term: T/T Shipping Port: Xiamen CA202 144-202-000-126 is a high-performance, industrial-grade piezoelectric accelerometer from the VM product line. This specific model is a standard version equipped with an 11-meter integral cable, designed for continuous vibration monitoring in demanding but non-hazardous industrial environments.
Brand: Vibro-Meter Description:Proximity Transducer Condition: New Warranty: 1 year Inventory Qty: 1 Payment term: T/T Shipping Port: Xiamen The Vibro-Meter IPC704 is a dedicated and high-performance machine protection card designed by the Swiss Vibro-Meter company for its flagship VM600 series of condition monitoring and protection systems. The model 244-704-000-042 A3-B03-C100-D77-E2-F5000-G0-H0-I0 is a fully configured order number. As the core protection component of the VM600 system, IPC704 is not used for routine condition monitoring data analysis, but is dedicated to executing high-speed and deterministic protection logic.
Brand: Vibro-Meter Description: Condition Monitoring Card Condition: Brand New Certificate: COO TEST REPORT WARRANTY LETTER Warranty: 1 year Inventory Qty: 5 Payment Term: T/T Shipping Port: Xiamen The Vibro-Meter CMC16 is a high-performance and intelligent front-end data acquisition unit designed by the Swiss Vibro-Meter company for its flagship VM600 series condition monitoring system (CMS). In the model 200-530-012-012, 012 represents its embedded software version, and 012 represents its hardware version.
Brand: Vibro-Meter Description: Condition Monitoring Card Condition: Brand New Certificate: COO TEST REPORT WARRANTY LETTER Warranty: 1 year Inventory Qty: 5 Payment Term: T/T Shipping Port: Xiamen The Vibro-Meter CMC16 is a high-performance and intelligent front-end data acquisition unit designed by Swiss Vibro-Meter SA for its flagship VM600 series of condition monitoring systems. In model 200-530-025-014, 025 represents the embedded software version and 014 represents the hardware version.
Brand: Vibro-Meter Description:Extension cable Condition: New Warranty: 1 year Inventory Qty: 1 Payment term: T/T Shipping Port: Xiamen EA402 913-402-000-012-A2-E040-F0-G000 is an industrial vibration monitoring module produced by Vibro-Meter, mainly used for vibration protection and monitoring of rotating machinery.
Brand: Vibro-Meter Description:Extension cable Condition: New Warranty: 1 year Inventory Qty: 1 Payment term: T/T Shipping Port: Xiamen EA402 913-402-000-013-A2-E090-F0-G000 is an industrial vibration monitoring module produced by Vibro-Meter, mainly used for vibration protection and monitoring of rotating machinery.
Brand: Vibro-Meter Description:Extension cable Condition: New Warranty: 1 year Inventory Qty: 1 Payment term: T/T Shipping Port: Xiamen EA402 913-402-000-013-A1-E050-F0-G000 is an industrial vibration monitoring module produced by Vibro-Meter, mainly used for vibration protection and monitoring of rotating machinery.
